Best vape mods and box mods of 2017

In our detailed best of list we take a look at the best vape mods & box mods on the market. Our list comprises beginner vape mods, high powered mods, compact mods and all-in-one vape mods. Our best vape mod list is based on the vape mods we have tested so far and those highly recommended to us by close friends and fellow experts.

Not everyone will agree with our list, but we hope it will provide readers with a clear overview of some of the best mods on the market. We will be updating the top box mods article as we review more devices going forward. Please take into consideration that there are many new mods coming out on a daily basis, therefore it might take a while for the best ones to make it onto our list.


Best entry level vape mods

  • Ideal for beginners / smokers
  • Compatible with most 510 drip tips
  • LED battery life indication
  • Great flavors available
  • 17 W output
  • Wide airy draw
  • Compact yet satisfying
  • No messy refilling required
  • 900 mAh battery life
  • Impressive cloud production
  • Cons
  • Not suitable for MTL vaping
  • Not available in 0 mg nicotine
  • Limited flavor selection (for now)
  • Specifications

    • 17 W output
    • 1.5 ohm resistance
    • 10-second continuous fire with auto shut-off
    • Micro USB charging port
    • Compact 22 x 47.5 x 60 mm design
    • 900 mAh battery
    • Overheat protection
    • Short circuit protection

    Box mods can be complicated, but they don’t have to be. Aspire has created a miniature box mod that delivers massive flavor. They put all the best features from their most advanced products, into a simple and compact device. Whether you’re new to vaping, or a seasoned vet, you will get pleasure from this device.

    With the Aspire Gusto Mini, you won’t need to fuss with refilling juice, buying coils and replacing batteries. Just pop in a new pod and you’re ready to vape. No mess, just pure vaping satisfaction. Excellent for transitioning from smoking, due to its simplicity. A perfect all-in-one vape mod for beginners who want a little more power.

    The Gusto Mini bears resemblance to the Plato, but smaller and easier to operate. Complete with all the necessary safety features such as overcharge, discharge and short-circuit protection. Featuring a 900 mAh battery, a 4.2-mL juice capacity and 1.5 ohm coils. Enjoying vaping is now easier than ever.

  • Supports 25 mm atomizers
  • Colorful design
  • 85 W of power
  • Easy to fill tank
  • Cons
  • Acrylic decals look cheap
  • Impractical to use at 85 W
  • Protruding battery cap
  • Specifications

    • Dimensions: 2.78 x 1.89 x 0.98 inches
    • 510 threaded
    • Wattage Output: 1 - 85 W
    • Temperature control: Ni200 / Titanium / SS316 / TCR modes
    • Temperature control: 100 - 315C / 220 - 600F
    • Bypass mode
    • Preheat functionality
    • Stealth functionality
    • 0.91-inch OLED display
    • Side micro USB charging port
    • Firmware upgradeable
    • Dual-circuit protection
    • Requires 1 x 18650 high drain battery

    The Pico is back! Imagine your favorite 25 mm attys on one of the smallest single 18650 mods ever made. Eleaf has made that possible with the new iStick Pico 25. This starter kit includes the ELLO tank, which has a convenient top-fill method that makes refilling your tank a breeze.

    The mod features a three piece design, with colorful acrylic panels. The mod goes up to 85 watts with full TC abilities and upgradeable firmware. If you love the Pico, but also want to use larger atomizers, now you can. Combined with the ELLO, this is an excellent and versatile starter kit.

  • 0.00000 coil-reading accuracy
  • Great battery life
  • Sufficient power
  • MODP power boost
  • Batteries included
  • Simple understated design
  • Cons
  • Minor gap when using other atomizers
  • No temperature control
  • Specifications

    • AETHON chipset
    • Dimensions: 3-7/16 x 1-9/16 x 15/16 inches
    • 510 threaded
    • Operating wattage: 6 - 110 W
    • Minimum resistance: 0.1 ohm
    • Maximum working current: 31.5 A
    • Maximum output voltage: 7.5 V
    • Wattage - voltage and bypass modes
    • MODP setting - 20% power boost for first 2 seconds
    • OLED display
    • Flip screen orientation
    • Requires 1 x high amp 20700 battery
    • Includes 2 x Ampking 20700 30 amp 3000 mAh batteries
    • Micro USB 2 A passthrough charging

    Innokin has decided to step it up with a new type of battery for the iRoar Oceanus 110W. By utilizing two 20700 cells held by a magnetic door, you get more battery life with enough power required for high wattage vaping. New MODP technology will make your vapor roar!

    The Innokin Oceanus uses the AETHEON chipset for accurate and efficient performance. The mod has three buttons, LED battery life indication and a side-mounted OLED screen. The full kit comes with the Scion, one of Innokin’s most sought-after sub ohm tanks. (Batteries included.)

    Save 5%
  • Tried and true design
  • Trusted Halo name
  • Good customer service
  • Includes juice and tank
  • Perfect for beginners
  • Great battery life (4400 mAh)
  • Comfortable size
  • Cons
  • Charging port located on top
  • No advanced features
  • Specifications

    • Battery logo: Halo / flame
    • Battery color: no
    • Battery thread: stainless steel
    • Button color: no
    • Battery type: manual
    • Battery cut-off time: 10 seconds
    • Battery length: 83.0 mm
    • Battery width: 45.0 mm
    • Battery capacity: 4400 mAh
    • Battery charge: no
    • Battery lifespan: 300 cycles
    • Battery voltage type: variable
    • Battery actual voltage: 2 - 10 volts
    • Battery rated voltage: No
    • Battery warranty: 60 days from date of purchase

    Finding your first vape can be difficult at first, but it just got easier thanks to Halo. This kit will give you everything you need to start including juice, a tank and mod. All of the features you would find on mods such as the Eleaf iStick, but from Halo. A company that is trusted by vapers.

    Most starter kits don’t have the newbie in mind, and require additional purchases. E-liquid, 18650s, coils, it can be very frustrating. This kit uses an internal battery just like a smart phone. You can start out on a lower setting and graduate to chucking fat clouds before you know it.

    Best 0 - 100W box mods

  • Waterproof
  • Virtually indestructible
  • Can take 18650 or 26650
  • 100 watts on a single battery
  • Nice button
  • Fine leather
  • Rugged steel C-frame
  • Cons
  • A bit heavy
  • Specifications

    • Size: 37.8 x 46.8 x 88 mm
    • Max power output: 100 W
    • Instantaneous firing: 0.015 s
    • Max firing duration: 10 s
    • Max voltage duration: 9V ± 0.1 V
    • Output mode: VW / VPC / TC / TCR / bypass
    • Resistance range: 0.05 - 3 ohm
    • Material: aluminum + zinc alloy + silicone
    • Battery: 1 x 26650 / 18650 cell (not included)
    • Temperature range: 100 - 315℃ / 200-600℉
    • Operating temperature: -40℃ – 80℃
    • Level: IP67 waterproof and dustproof; MIL STD 810G - 516.6 military-grade shockproof

    A beauty and a brut! The Geek Vape Aegis is waterproof and it’s a virtually indestructible 100-watt mod that operates on a single 18650 or a 26650 for increased battery life. The build quality of this mod is unbelievable, and the ergonomics of the Aegis feel great in the hand.

    The Geek Vape Aegis fires down to 0.05 ohms with a max output of 100 watts, and it’s got TCR, all TC modes, wattage curves, and a thick LED screen. The atomizer platform is ~35 mm which means most tanks will fit on it without overhang.

    Save 5%
  • Comfortable feel
  • Easy to operate
  • Great battery life (5000 mAh)
  • 80 watts capable
  • 10 user profiles
  • Trusted name
  • Customizable logo
  • Cons
  • Charging port on the bottom
  • Menu may require learning
  • Specifications

    • Battery cut-off time 10 seconds
    • Battery length: 84 mm
    • Battery width: 50 mm
    • Battery capacity: 5000 mAh
    • Battery charge: no
    • Battery lifespan: 300 cycles
    • Battery voltage type: variable
    • Battery actual voltage: no
    • Battery rated voltage: no
    • Battery warranty: 60 days from date of purchase

    The Halo Reactor Mega delivers all the functionality in all of the best vape mods. Everything is included in this easy-to-use setup from a name that vapers can trust. It is compact and stylish. If you’ve been thinking about upgrading to a box mod, look no further. It even comes with their famous e-juice!

    The Reactor Mega box mod is loaded with tons of battery life (5000 mAh) and can put out 80 watts. It also has temperature control and smart mode, which can store 10 different user profiles. The starter kit includes the Reactor Mega tank which is a perfect addition to this vaping setup.

  • Comfortable to hold
  • Slim and lightweight
  • Fires up to 50 watts
  • Four power modes
  • Internal 2500 mAh battery
  • Self-rotating screen
  • Cons
  • Slight overhang with 24 mm and above atty's
  • Delayed atomizer reading
  • Battery indication can be misleading
  • Specifications

    • Wattage range: 1 - 50 W
    • TC range: 300 - 600F
    • Built-in 2500 mAh battery
    • Atomizer resistance range: 0.1 - 3 ohm
    • Charge time: 2 hours
    • Material: zinc alloy and aluminum alloy

    For simplicity and power in a portable package, the Aspire Zelos is the way to go. Featuring a built-in 2500 mAh battery and 50 watts of raw power, don’t be fooled by it’s slim profile. The Zelos is the perfect match for the Nautilus 2, however it also works great with most sub ohm devices too.

    Other special features include a 0.69 inch self-rotating display, 1-amp micro USB pass-thru charging and a spring-loaded 510 connection. The Aspire Zelos is discreet and pocketable for the casual vaper and yet has enough power for the the cloud-chucking vape bro.

  • Loads of power for a small mod
  • Ultra compact
  • Silicon sleeve included
  • Ergonomic
  • Sturdy
  • Temperature control
  • Cons
  • No support for stainless steel temp control
  • Micro-USB port on the bottom
  • No updated user interface
  • Specifications

    • Dimension: 96 x 43 x 23 mm
    • Colors: black and silver
    • Output voltage range: 1.2 V - 8.5 V
    • Variable wattage: 7 W - 50 W
    • Battery capacity range: 3.2 V - 4.2 V
    • Atomizer range: 0.2 - 3.0 ohm

    When you’re on the go, you may not want to take your biggest box mod outside. The Sigelei Spark 90W is the perfect solution for the vaper who wants maximum power and portability all in one package. The Spark puts a serious dose of power with a single 18650 battery.

    The Sigelei Spark is a solid daily driver for the typical vaper, but is also capable of firing down to 0.1 ohms, so it can push a heavy load. Complete with an OLED screen, safety features and temp control functionality. Sometimes all you need is that little spark.

  • Compact size
  • Goes up to 80 watts
  • Simple
  • Improved ergonomics
  • Tactile buttons
  • Solid reliability
  • Cons
  • No extra features
  • Dated user interface
  • Proprietary USB charging cable (non-micro USB)
  • Specifications

    • Chipset by Yihi| version SX310H
    • Requires 1 x 18650 high amp battery
    • USB Chargeable – pass through available
    • Output voltage: 1 – 7 volts
    • Output power: 7 – 80 watts
    • Output joules: 10 – 80 joules
    • Reads resistance in joule mode down to 0.05Ω up to 0.5Ω
    • Temperature range: 212 – 572 Fahrenheit
    • Reads resistance in power mode down to 0.15Ω up to 3.0Ω
    • Input voltage: 3.2 – 4.5 volts

    The iPV has gained a reputation as one of the most reliable daily drivers for serious vapers. The D4 has a familiar no frills design, but with noticeable aesthetic improvements. It pumps out 80 watts of power, and is capable of temp control with SS, Ti and Ni courtesy of the YiHi SX130H chipset.

    Pioneer4you clearly went with the saying “if it ain’t broke, don’t fix it”, because not much has changed since the previously released iPV D3, aside from a few minor upgrades. The most notable difference being the smoother edges and a classy, rough, brushed-steel finish.

    Best 100-300W+ box mods

  • Squeezable firing bar
  • Soft/normal/hard modes
  • Compact dual 18650 mod
  • Intuitive user interface
  • Individual battery life indication
  • Internal temperature monitoring
  • Supports coils down to 0.06 ohms
  • Great battery life for a dual battery device
  • Cons
  • Slight overhang with 25 mm attys
  • Stiff battery door
  • Won't fire below 6 watts
  • Specifications

    • Dual high-amp 18650
    • Dimensions: 85 mm by 44 mm by 30 mm
    • Wattage output range: 6 - 220 W
    • Min atomizer resistance: 0.06 ohm
    • Temperature range: 200 - 600F
    • Supports Ni200 / Ti and SS heating elements
    • Premium zinc alloy construction
    • Detail-orientated OLED display
    • Series connection
    • Dual battery life indicator
    • Stealth firing mechanism
    • Ergonomically-placed adjustment buttons
    • Hinged battery cap
    • Micro USB port - firmware upgradable
    • Alien V1.2.2 firmware upgrade
    • 510 connection

    The SMOK Alien 220W TC is one of the first mods to feature a squeezable firing system. The device is stealthy for a dual 18650 device. It has a secure locking battery door and a bright OLED screen. The Alien displays all your vital information in a neat and organized fashion.

    Other noteworthy features include full temperature control functionality with custom TCR and three different preheat modes. It also offers custom user profiles, individual battery monitoring and all of the performance you would come to expect from SMOK. The full kit comes with the Baby Beast sub ohm tank so you can get huge vapor and excellent flavor right out of the box.

  • Customizable LED panel
  • Charges up to 2.5 A
  • Sophisticated preheat control
  • Fire button easy to press
  • Leather panel for added comfort
  • Crisp color screen and interface
  • Lighter than the Predator
  • Cons
  • Fire button rattle
  • Screen hard to read screen in sunlight
  • LED lights require extra battery life
  • Specifications

    • Dimensions: 88 x 45 x 30 mm
    • Zinc alloy construction
    • Wattage range: 10 - 230 W
    • Temperature range: 200 - 570°F / 100 - 300°C
    • Input voltage range: 6.4 - 8.4 V
    • Output voltage range: 1.0 - 7.5 V
    • Max output current: 35 A
    • Output modes: power / SS / Ti / Ni200 / TCR
    • Resistance range: 0.1 - 3.0Ω
    • Charge current: DC 5 V / 2.5 A
    • 6 color LED light belt
    • Customizable light belt
    • 0.96-inch TFT color display
    • Requires 2 x 18650 batteries (sold separately)
    • Latched bottom battery cover
    • Micro USB port (charging & upgrading)
    • Improved Interface

    If you’re the type of vaper that likes to stand out, the Kaos Spectrum 230W TC is right up your alley. It features a bright LED panel that is customizable with six color options. The Kaos also supports up to 2.5 A charging, so you can power up faster than ever before.

    Other notable features include temp mode functionality and sophisticated preheat control. Its 0.96 inch TFT color screen is crisp, easy to read and displays battery life information for each cell. The Kaos Spectrum also has an oversized fire button that takes very little effort to push.

  • Stealthy for a dual-18650 mod
  • Accommodates large atomizers up to 29 mm
  • Convenient firing bar
  • Locking bottom battery door
  • Supports up to 2 A charging blocks
  • Adjustable TCR modes
  • Ergonomic design
  • Cons
  • Fire button is a little stiff
  • Generic Wismec interface
  • Weak 510 connection
  • Specifications

    • Dimensions: 43.6 x 29 x 86.7 mm
    • Wattage range: 1 W - 228 W
    • Temperature range: 200 - 600°F / 100 - 315°C
    • Output voltage range: 0.5 - 9.0 V
    • Resistance range: 0.05 - 1.58Ω (TC modes) / 0.1 - 3.0Ω (VW mode)
    • Max charge current: 2 A
    • Max output current: 50 A
    • Requires 2 x 18650 batteries (sold separately)
    • Micro USB port (charging & updates)
    • Flip-open battery cover
    • 2 A max quick charge
    • Balance charge technology
    • Innovative buck-boost technology
    • Steady power output
    • Dual circuit protection
    • Reverse polarity protection
    • Reverse charging (serves as a power bank)
    • Ergonomic size
    • Hidden fire button
    • Lateral fire key
    • Large OLED display
    • Detailed vaping data

    The Wismec Predator 228W TC Box Mod gives you all the power you need in the palm of your hand. All you need to do is squeeze the fire bar to create huge clouds. It supports coils down to .01 ohms and uses buck-boost technology for reliable output and temp mode for Ni, Ti and SS.

    The Wismec Predator supports charging up to 2 A with a supported charging block and is powered by two high-drain 18650 batteries. The organized vertical OLED display shows battery life of each cell. The Predator is an affordable, versatile mod for a wide range of vapers.

  • Durable
  • Real time clock
  • Powerful chipset
  • Centered 510 connection
  • Comfortable firing button
  • Fits up to 28 mm atomizers
  • 2.5 A charging compatible
  • Cons
  • Attracts fingerprints
  • User interface requires patience
  • Slight button rattle
  • Specifications

    • Max output wattage: 220 watts
    • Wattage range: 5 - 220 watts
    • Voltage range: 0 V - 8.5 V
    • Resistance range: 0.05 - 5Ω
    • Temperature control range: 100 - 315℃ / 200F - 600F
    • Output Modes: VW (H / N / S) / CCW / CCT / VT (NI / TI / SS) / TCR (M1-M2) / RTC / bypass
    • Battery: 2 x 18650 (not included)
    • IML Case
    • OMNI board 2.0 chipset
    • Dual battery indicators
    • Voltage / wattage / resistance indicators
    • Remaining charging time indicators
    • Real-time clock display
    • Charging equalization system

    The Vaporesso Revenger 220W TC is one of the first mods to utilize IML injection coating which fuses style with durability. The mod utilizes Vaporesso’s OMNI 2.0 chipset which allows full user customization of wattage and temperature curves to satisfy even the most technical vapers.

    The Revenger is powered by two 18650’s protected by a solid magnetized door. It puts out a serious amount of juice for some massive clouds. Other special attributes include a real time clock, firing capabilities down to 0.05 ohms and a variety of output modes and a 0.96-inch screen.

  • Attractive aesthetics
  • Fully customizable LED lights
  • Squeezable firing button
  • Easy to navigate menu
  • Cons
  • Incompatible with atomizers larger than 25mm
  • LED lights will drain battery life
  • Difficult to clean
  • Specifications

    • 86.6 by 48.1 by 32 mm
    • Dual high-amp 18650 batteries
    • Wattage output range: 6 - 220 W
    • Voltage output range: 0.5 - 9 V
    • Min atomizer resistance: 0.06 ohm
    • Temperature range: 200 - 600F
    • Supports Ni200 / Ti / SS heating elements
    • Compatible with Big Baby or Baby Beast coils
    • 9 colorful LED strips - fully customizable
    • Intuitive OLED display
    • Full display matrix - rich data feedback
    • Stealth firing bar mechanism
    • Hinged battery cover
    • Intelligent atomizer recognition
    • Puff monitoring system
    • 12-second cut-off
    • Short circuit protection
    • Over-heat protection
    • Low battery warning
    • Micro USB port
    • 510 connection

    The overwhelming success of the Alien didn’t slow down SMOK from making the next step. The T-Priv 220W TC is a versatile mod that takes every type of vaper into consideration. Features include LED lights with 9 color options, a squeezable firing bar and a big top-mounted screen.

    The SMOK T-Priv is fully capable of temperature control with adjustable TCR modes in addition to having preheat capabilities. Powered by dual 18650’s, this mod puts out more then enough power for chucking tasty clouds, especially when paired with the TFV8 Big Baby sub ohm tank.

  • Customizable wallpaper/fonts
  • Joystick controller
  • Real-time clock
  • Authentic carbon fiber decals
  • Oversized centered 510 connection (fits 30 mm atomizers)
  • Bluetooth connectivity
  • YiHi SX550J chipset
  • Cons
  • Joystick controller protrudes
  • Not ideal for pocketing
  • Chunky design
  • Non-micro USB charging port
  • No visual indication for each cell
  • Specifications

    • Chipset: YiHi SX550J
    • Max output wattage: 200 watts
    • Max output current: 50 amps
    • Max output voltage: 9.5 volts
    • Temperature control compatible
    • Temperature control range: 212 - 572°F (100°C - 300°C)
    • Resistance range: 0.15 - 3.0 ohms
    • Temperature control resistance range: 0.05 - 0.3 ohms
    • Max Input Current: 40 A
    • Single battery / Dual battery convertible
    • Requires 2 x 18650 high amp batteries (sold separately)
    • Bypass mode
    • Joystick control
    • Bluetooth app compatible (Android & iOS)
    • SX pure technology
    • Compatible with SS / Ti / Ni coil types
    • Customizable wallpaper
    • Reverse polarity
    • Output short protection
    • Low resistance
    • Battery low voltage protection
    • Temperature overheat protection
    • Battery overcharge protection
    • Customize your logo & menu name
    • Firmware upgradeable
    • Adjustable screen brightness
    • Adjustable standby time
    • Anti-dry burning technology

    The SX Mini G Class 200W TC utilizes a unique joystick control system to easily navigate through its menu. The mod syncs up via Bluetooth so you can fine tune your settings using your phone or tablet. The SX550J chipset also allows you to fully customize wallpaper and fonts.

    The device does accurate temperature control for your favorite temp wires, custom TCR and utilizes SXi-Q Intelligent Taste Curve technology. The G Class is capable of balanced 2 A charging of both 186550 batteries which is monitored by a vivid full-color OLED display.

  • Dual battery life monitoring
  • Touch-sensitive button
  • Can be used as a powerbank
  • Gold-plated battery connectors
  • Rotating screen
  • Customizable logo
  • Real time analog or digital clock
  • Preheat functionality
  • Up to 2 A on board charging
  • Cons
  • Decals come off easily
  • Screen difficult to see in sunlight
  • Easy to auto-fire with tap button (but can be disabled)
  • Specifications

    • Utilizes Joyetech TAPTECH technology
    • Pressure sensitive system and vibration motor feedback
    • Dimensions: 3 3/8 x 1 5/8 x 1 1/8``
    • Comfortably fits 25 mm and smaller tanks
    • Spring-loaded 510 contact pin
    • Temperature control: nickel / titanium / stainless steel 316 and TCR mode
    • Output wattage: 1 - 228 W
    • Temperature control range: 100 - 315C / 200 - 600F
    • Resistance range: 0.05 - 1.5 ohm for variable temperature mode
    • Resistance range: 0.1 - 3.5 ohm for variable wattage and bypass mode
    • Bypass mode
    • Preheat function
    • Custom logo
    • Real time clock
    • Stealth function
    • 1.3-inch OLED display
    • Requires 2 x high amp 18650 batteries (sold separately)
    • Micro USB port for firmware updates and charging
    • Maximum charging current: 2 A
    • Flip open battery door cover
    • Upgradeable firmware
    • Dual-circuit protection

    The Cuboid Tap 228W TC is one of the first of its kind to incorporate pressure-sensitive TAPTEC technology. This gives you the option to simply tap to fire and breeze through its menu system. It also has a vertical 1.45-inch display and the option of either a digital or analog clock.

    Utilizing two 18550s, the Cuboid Tap is capable of firing coils down to 0.1 ohms and is complete with temperature control with three TCR memory settings with preheat functionality. Last but not least the Cuboid uses gold plated battery connectors is suitable for balanced charging up to 2 A. The complete kit comes with the new Aries sub ohm tank and utilizes new Pro C Series coils.

  • Supports to 2 A balanced charging
  • Functions as a powerbank
  • Monitoring of each battery
  • Customizable logo (with firmware)
  • Accommodates up to 28 mm atomizers
  • Comfortable and sleek form factor
  • Cons
  • Difficult to see screen under direct sunlight
  • Specifications

    • Dual high-amp 18650 batteries (sold separately)
    • Wattage output range: 1 - 220 W
    • Maximum voltage output: 50 A
    • Minimum atomizer resistance: 0.05 ohm
    • Temperature control range: 200 - 600F
    • Ni200 / Ti / SS316 compatibility
    • TCR adjustment - 3 memory modes
    • Ergonomic soft contour
    • Optional power bank capability (requires reverse charging (RC) adapter
    • Preheat functionality
    • Intuitive OLED display
    • Switchable interface
    • Compact design with soft contour
    • Hidden firing bar mechanism
    • Hinged flip battery cover
    • Cell balancing trickle charge system
    • Innovative buck-boost technology
    • Dual-circuit protection
    • Reverse polarity protection
    • Stainless steel 510 connection

    At first glance, the Eleaf iKonn 220W TC bears resemblance to a lot of mods that have been coming out recently, such as the SMOK Alien. Utilizing a squeeze to fire system, the iKonn packs in features that would previously be found on dual 18650 mods much higher in price.

    Offering a 0.91-inch easy-to-read display, upgradeable firmware and ample power for both flavor and cloud chasing. The iKonn also implements a special battery balancing trickle charge system to ensure an accurate charge all the way up to 2 A, and can also be used as a power bank.

    The kit includes the ELLO tank, the latest 25 mm sub ohm tank with sliding top fill functionality.

  • Excellent build quality
  • Tasteful branding
  • Carbon fiber and resin available
  • Easy to use software interface
  • Relatively small size
  • Excellent performance in VW and TC
  • One-watt adjustment increments
  • Cons
  • No rounded edges
  • Not a lightweight mod
  • Specifications

    • Size: 90 x 54 x 24 mm
    • Weight: 212 g (298 g with batteries)
    • Material: zinc alloy / carbon fiber
    • Batteries: 2 x 18650 (not included)
    • Working voltage: 6.4 - 8.5 V
    • Working current: 1 - 40 A
    • Output voltage range: 0 - 7.5 V
    • Output current range: 0 - 40 A
    • Resistance range (VW): 0.05 - 3.0Ω
    • Resistance range (TC): 0.05 - 1.5Ω
    • Output power: 5 - 157 W
    • Charging voltage: 5 V
    • Charging current: 1800 mA
    • Standby current: 10 µA
    • Temperature range: 200 - 600℉ / 100 - 315℃
    • Heating elements supported (TC): Ni/Ti/SS
    • Working efficiency: 95%
    • Firmware upgradeable: yes

    Don’t let the name fool you. The Voopoo Drag is no joke. Loaded with features including a full temp control suite, super mode, and accurate power output, courtesy of the Gene Fun chipset. The mod fires within 0.025 seconds of engaging the button, powered by two 18650 batteries.

    The Voopoo Drag pays homage to the original box mods with a boxy aesthetic. Its features are what sets this mod apart. Much like the Vaporesso Omni chipset, the Drag allows you to control heating curves, customize settings and even insert a custom logo. Available in carbon fiber and resin in a variety of colors. The Voopoo Drag is a dependable workhorse for your daily lifestyle.

    Best compact box mods

  • One of the smaller single battery devices
  • Squeezable firing switch
  • Fires down to 0.1 ohms
  • Bright OLED screen neatly displays vital information
  • Fits up to 25mm atomizers
  • Cons
  • Threading on battery cap are a bit crunchy
  • Hard to remove battery in case of venting
  • Specifications

    • Single high-amp 18650 battery
    • Dimensions: 71 x 48 x 27 mm
    • Wattage output range: 1 - 85 W
    • Min atomizer resistance: 0.06 ohm
    • Temperature range: 200 - 600F
    • Supports Ni200 / Ti / SS heating elements
    • Memory mode
    • Hard/norm/soft modes
    • Premium zinc alloy construction
    • Full-matrix OLED display
    • Stealth firing mechanism
    • Ergonomically placed adjustment buttons
    • Top-loaded threaded battery cap
    • 510 connection

    The AL85 by SMOK puts all the things people love about the Alien, in a much smaller package. Capable of pumping out 85 Watts using a single 18650 battery, this mod fires down to 0.1 ohms. Much like its predecessor, the AL85 has carbon fiber decals and a side-firing switch.

    The SMOK AL85’s display provides information displayed in real time, just like its big brother. It has full temperature control functionality with adjustable TCR plus three memory settings. The kit comes with the Baby Beast, a killer combo for any stealthy flavor chaser.

  • Very portable
  • Includes everything you need
  • Free shipping
  • Superior customer service
  • More than enough power
  • Ideal for beginners
  • Cons
  • Protruding battery cap
  • Overhang with above 23 mm atomizers
  • Proprietary USB charging
  • Specifications

    • Battery logo: Halo / flame
    • Battery color: no
    • Battery thread: stainless steel
    • Button color: no
    • Battery type: manual
    • Battery cut-off time: 10 seconds
    • Battery length: 71 mm
    • Battery width: 45 mm
    • Battery capacity: 2000 mAh
    • Battery charge: no
    • Battery lifespan: 300 cycles
    • Battery voltage type: variable
    • Battery actual voltage: no

    If you’re still making the transition from smoking, finding the perfect setup can be confusing. The Halo Reactor Shorty kit provides everything need to quit cigarettes and start vaping. It gives you a powerful mod and sub ohm tank in a fun-size package. It even comes with the battery and juice!

    If you want advanced features such as temp control, the Reactor’s got it. Giving you all the features of the popular Eleaf Pico, backed by a trusted American brand. Halo also happens to make some of the best e-liquid around. The only thing you’ll worry about is picking a flavor.

  • Comfortable to hold
  • Textured design
  • Intuitive for beginners
  • Good battery life
  • LED battery indication
  • Extremely stealthy
  • Cons
  • Can't adjust wattage/voltage
  • Power diminishes with battery life
  • Doesn't fit larger than 22 mm atomizers
  • Specifications

    • Size: 38.5 x 24 x 60 mm
    • Power: 28 W
    • Capacity: 1700 mAh
    • Max voltage output: 4.2 V
    • Resistance: 0.5 ohm
    • Temperature: 0 - 40℃ (working) / -20℃ - 60℃ (storage)

    Digiflavor kept simplicity and personality in mind when creating the Ubox Starter Kit. Ideal for the beginner on the go. A portable setup that’s easy to use. Keep it simple without sacrificing power. The Ubox has a design that’s both ergonomic and yet very stylish.

    The Digiflavor Ubox functions like a bite-sized mechanical mod except that it’s much safer. Plus it always puts out just the right amount of wattage, according to your coil’s resistance. Its 1700 mAh internal battery is monitored by three LED lights. Finally, a box designed with “U” in mind.

  • Puts out 80 W of power
  • Full TC support
  • Big and bright screen
  • Swappable panels
  • Bypass mode
  • Tiny
  • Cons
  • Not practical at 80 W
  • Not lightweight
  • Chunky
  • Specifications

    • 1 to 80 W output range
    • JayBo Designs collaboration
    • Bypass mode
    • Firmware upgradeable
    • Temperature control suite
    • Ni200 support
    • Titanium support
    • SS316L support
    • Adjustable three memory TCR
    • Fine tune temperature output
    • 200 to 600 degree Fahrenheit range
    • 0.05 to 1.5 ohm atomizer resistance range
    • Vibrant OLED screen
    • Vertical arrangement
    • Split three button control face
    • Oversized firing button
    • Recessed bottom adjustment buttons
    • Rocker switch configuration
    • 2100 mAh built In battery
    • Spring loaded gold-plated contact
    • Dual circuit and reverse polarity protection

    A Reuleaux that fits in your pocket. The Wismec RX Mini fires up to 80 watts with a built in 2100 mAh battery, with micro USB charging capabilities. Full temperature control functionality and a big, vivid display. This is one of the most powerful miniature devices on the market right now.

    Other features include customizable TCR and support for all of the most popular TC wire. The RX Mini also has a big firing button and a similar aesthetic to the most popular mod of last year. Keeping the design and functionality that Wismec is known for but in a much smaller package.

    Vape mods explained

    best box mods

    What is a vape mod?

    A vape mod is a power source, essentially a case that contains one or more rechargeable batteries, that supplies electricity to a vaping atomizer. They are also referred to as “vapor mods”. The term “mod” has its origins in the early years of e-cigs, where hobbyist vapers “modified” existing electrical hardware (cases, batteries, wiring, etc.) for custom use as vaping hardware.

    Now all e-cig power sources are called mods. Box mods are one of two primary types of power sources, with tube mods being the other. Almost universally, box mods have a firing switch or button. Press the switch and the atomizer gets power from the mod and “fires”, vaporizing eliquid with the instantly heated coil. Release the button, and the power is cut off.

    Different types of box mods

    Box mods come in different designs, configurations, and aesthetics. They may be constructed with fixed internal LiPo batteries that recharge via USB cables or with removable Li-Ion batteries that can be recharged either via USB or outside the mod in a dedicated charger. The majority of USB-recharged box mods allow vaping while charging (called passthrough), but not all. Removable battery vape mods allow the user to swap out drained batteries for fresh, fully-charged batteries. Both types are popular and available.

    A box mod with removable batteries may incorporate one to four rechargeable Li-Ion batteries, although one or two is most common.

    Typically, box mods have a rectangular shape, but this varies from regular boxes with sharp, straight angles to more ergonomic and aesthetic curved designs.

    Box Mods can use any of various regulating chips/boards that vary from providing simple safety protections to more sophisticated functions, such as variable wattage output and temperature control. The second type usually has a display screen that shows information about the settings and functions. Some box mods are designed and made with no chips at all, and occasionally even no soldered wiring, in which case they’re called “mechanical mods.”

    Vape mods (or vapor mods) are made in many sizes and every conceivable design. Materials include plastic, metal, and wood. Colors range from basic black or silver through the entire spectrum, and from simple monochromatic adornment to beautiful works of art.

    Most vaping hardware qualifies as “disposable,” and this includes box mods. Few are designed and manufactured to last forever in actual use. Lifespan varies wildly, from a couple months before they break or stop working to many years of faithful, dependable service.

    Which vape mod is right for you?


    Choosing a the best vape mod for you requires answering numerous questions about your preferences:

    • How much power do I want?
    • How large (or small) do I want my box mod to be?
    • How important to me are the ergonomics and aesthetics of my box mod?
    • How much sophisticated chip technology do I want?
    • How long can I vape between battery recharges?
    • How much am I willing to spend?

    There’s likely to be a box mod available in the marketplace for every combination of responses, so finding the best vape mod to fit your preferences shouldn’t be too difficult

    What are temperature-controlled vape mods?


    Vaping began in 2005 by using fixed voltage power sources exclusively. Around 2011, variable voltage was developed, followed quickly by variable power (wattage).

    Temperature control followed on the heels of those earlier improvements. Temp control (or TC) is the most recent technological development in vaping chips that emerged initially in 2014 and has quickly become an industry standard feature of most mods.

    Atomizers operate by vaporizing e-liquid with a metal heating element, usually in the form of coiled alloy wire. E-liquid is supplied (or wicked) to the atomizer by silica, cotton, or other fibrous cellulose material that goes through or around the coil or coils. If the wick is not sufficiently saturated with e-liquid, the result is “dry hits”. A dry hit not only produces no vapor, but tastes terrible, with either a nasty burnt wick taste or an even more unpleasant hot metallic aftertaste.

    Also, unregulated e-cig mods perform less efficiently as the battery/batteries drain. What starts out as a great-tasting full vape with fresh batteries diminishes over time, providing less flavor and vapor.

    Temperature control addresses both those problems by regulating and controlling the amount of power supplied to the coil. When the coil is not “bathed” sufficiently in e-liquid, it quickly overheats, producing dry hits. Temp control technology doesn’t actually sense temperature — instead, it monitors the changing resistance of the coil, which corresponds to predictable changes in temperature. When the coil begins to overheat, the temp control chip instantly reduces the power, thus preventing the wick from burning and minimizing or eliminating dry hits. If the coil becomes totally dry, power will be completely cut off.

    In addition, temp control provides a consistent vape throughout the power range of the battery drain.


    Most temp control vape mods currently require atomizers to be outfitted with coils using one of three specific wire types — nickel, titanium, or stainless steel. As the technology is improved and refined, other wire types such as kanthal, nichrome, or even tungsten, may be usable with TC some day.

    TC lets the vaper specify the maximum temperature allowed before temp protection (i.e., instant voltage limitation) activates. The range is typically from 100-300° Celsius, or 300-600° Fahrenheit. As much power is applied as necessary to maintain the set temperature, but no more.

    Temp control has not been universally adopted by vapers. Those who use TC tend to swear by it, but many other vapers use TC only sporadically or not at all. Since most mods now contain regulating chips, however, and since it’s no more expensive for manufacturers to include temp control technology in their chips, TC has largely taken over the vape mod marketplace.

    The Vaping360 team is a diverse group of experienced vaping contributors. We strive to bring you the finest content on all things vaping. Don’t forget to sign up to our newsletter and make sure to follow us on Facebook and Instagram for more!


    1. Now this is a very worthwhile piece to read , i find the overwhelming majority of reviewers out there these days to be a major disappointment but you did a very good job on this one.


      • Hey, you got to give credit where credit’s due , your reviews are where i have directed people to go when asked for good info on mods and other gear as a matter of fact .

        Love the way you lay it all out as well , very easy to navigate and follow along.

        Keep up the great work my friend.

        • Appreciate you spreading the word! Lots to come over the next few months. We have got some other reviewers on board to review more gear and we will be focusing on making the site quicker and nicer!

    2. @akendell:disqus Have you tried the new 200W snow wolf or the IPV3 LI with the 200w firmware upgrade yet?

          • If by kbox mini you are referring to the Kanger Subox, then yes I would say it is a decent little box mod that will fire up to 50W! Also check out the Innokin Disrupter as that is also a good 50W box. Need to add that one to this list!

    3. For me, Sigelei 75W Box Mod with Temperature Control is amazing box mod,i’m planning to buy one.Thanks for your review,very useful.

    4. Very nice round up. I think your list sums it all up as far as mods go. You have listed a device for every type of vapor out there. Myself, having gone through alot of mods…..MVP 2, 20W….iStick 30W, 50W…Sigelei 30W mini…Smok XPro M80 Plus. I have finally settled on a simple but powerful mod. The Sigelei 150W in Royal Blue. I found out that I wanted something with power, replaceable batteries, and a great product. I did read your review of the Sigelei 150W and liked it. You guys are good. Keep up the excellent work.

    5. Mine Modz 120 Watt Raptor, cleanest work you will find, a beast of a box around 135.00. A plus is that you can deal with the maker directly instead of having a hundred dollar paper weight after the chinese junk breaks. I have several of those planned obsolescence devices on my desk.

          • Hi DevilsXcry,
            As Alex mentioned, we had a massive site re-design recently which took two months to complete, so things were quite quiet during that time. We are tying to get more reviewers in place to make sure we cover more products, but unfortunately due to the market moving so quickly it is very hard to cover even a fraction of the new products coming out and some things just get missed. We are doing our best, so bare with us! Over the last month we have published around 20 reviews, which I don’t think is too shabby. We have to make sure we appeal to all types of vapers with our reviews, so that means providing a mix of products and not just box mods.

            Best regards,

      • I have the Snow Wolf 200w TC. This thing is so fun I can hardly put it down for long. I have the limited edition with the gun metal finish. It also has the updated chip on this model. The first gen snow wolf 200 had some issues that were addressed with the new version. The only cons so far are
        Fingerprints get on the mod too easily constantly wiping them away just to leave more in a few seconds.
        Changes to pulse mode when you turn up the mod sometimes over 150 watts (though I never need that kind of burn anyway even on my dripper) Depending on what your build is also. I’d have to be insane to try it out of a subtank with that kind of wattage

      • I love love love the snow wolf 200w! The only downside is it absolutely CANNOT take a fall! But it is amazing overall!

        • Mone worked amazinggg, I loved it knocked it of my laundry basket like a foot and a half to the ground… it worked after and then I went to bed and now it won’t turn on. Any way to go about fixing it?

          • I dropped my snow wolf and had a similar problem.
            I found with mine the batteries had bumped the contacts, squashing them slightly, so they would no longer touch correctly. A little, light pull on the contacts to bend them back out slightly, fixed the contact issues and it’s been working fine ever since.
            May not be the problem you are having but worth a try.

      • The snow wolf is lame imo its not actually 200w just 150w DC then it will pulse to simulate the wattage intended over that. Its so heavy too, I felt like my jeans were falling down with it in my pocket xD.

        Get a cuboid they are miles better imo, it will actually go to 200w if your battery and coil setup allow.

          • That depends on your coil ohms and batteries actually, you can’t just say no duel 18650 would because if you have your ohms low enough you can get the watts high enough but it would increase amp draw so batteries would have to be high quality.
            So theoretically you could but most regulated box mods have a minimum ohm safety feature. In reality you could do it on an unregulated boxmod but would put undue strain on the batteries unless you are using new 35 amp cells

            • I use the Joy tech Cuboid, TFV4 octuplet coil, with dual LG 18650’s and it’s fantastic. The only problem is that the Cuboid has a 25amp capacitor built in to the firmware, so you can’t get an actual 200w with it… Unless someone else has a way, or hopefully joytech addresses this issue. But none the less, I use my setup at 100w, with the coil at 0.19ohms, and I get pretty hearty cloud and flavor.

    6. Thanks for the great info. I have a question I can’t seem to get an answer to. I have the MVP 3.0 and my ohm just flash. What is up with that? Is something wrong with my box?

      • Hi Shellely. I am no too sure tbh, as I haven’t seen that happen before. Does the mod still work or does it just flash and not work? Maybe its not making the proper connection with the tank. Try another and see if that is doing the same thing.

    7. Obviously, just as with sub-ohm tanks, devices that can power sub-ohm tanks are coming out at a furious pace…Volcano’s Lavatube 3 and LavaBox…Johnson Creeks Vea Elite (which is actually the USA version of the S-Body Mini Torch)…the S-Body Macro by VaporShark and DNA200 (also made by S-Body I believe, who also were the makers of VaporSharks DNA/rDNA mods)…the IPV D2 from Pioneer4You…the Esquare/ Epetite and Tan DNA40 devices by Lost Vape…Snow Wolf v1.5 Limited Edition…the Troca/Alesia and Suprabox from JWell which is beginning it’s inroad to the USA market (btw, don’t forget to check out their sub-ohm coil tanks, the Strada and the Duplx)…and on and on…

    8. Can someone help me. I just received my ipv4 S and I’m using it with my kanger subtank mini. I cannot fire up and constantly receive low resistance. Sometimes even the message short. Batteries are legit and fully charged, hit + and – keys to try and set but can’t really get it past. 006. Cleaned the 510 connection as well. Is it the tank itself because I have the Smok TFV4 coming.

      • Have you tried a new coil on the subtank? Could be that the wire inside the coil. Is the tank clean? Could be that liquid got to the connector and that is why you are getting a short.

      • I guess it is one of those products you love or hate. I have heard good things and bad things about it but personally we have had zero issues with the 10/20/30W iSticks. They are very affordable and easy to use. We did take out the 50W device due to production issues but Eleaf have fixed the main issues with the last batches.

    9. So I’m lookin for a box mod with variable voltage/wattage for my wife. I have the ipv4 and she loves it but she thinks its to ugly.. She wants a girly one. Like pink or purple. Anyone know of one?? Thanks guys!

    10. Two mods come to mind that you missed. Snow Wolf 200W and iStick TC40W. I really think you should check out the iStick TC40W as its a great TC mod for its price point. Its great for an intro TC device if anything. I really hope to see it on your list soon. Seems like you guys neglected it for some reason. To be honest, I had it and ran my Herakles in TC mode and it was amazing! Flavor and clouds were outstanding. I moved up to my evic vt for battery life and my iStick TC40W was vaped forward to a friend.

      • Hi Nick. Yeap we need to update the article, as there are just so many new mods right now. Hard to keep up, but I will definitely consider the two you mention, as they both seem like great mods. Appreciate your recommendations!

    11. I am trying to decide which mod to get!
      I want to quit smoking! But I haven’t found the right set up (juice included) to satisfy my craving… So someone Please Help!!!
      I am trying to decide between several..
      1.) Kangertech Subox Mini
      2.) Kangertech Subox Nano
      3.) eLeaf iStick 50w
      4.) eVic VTC Mini by JoyeTech
      Or if someone has a better recommendation, please let me know!
      Thank you in Advance!!!

      • Hi Amanda. I wouldn’t get the iStick 50W, as it had some autofiring issues. Any of the other three are solid choices. The Subox Mini has a larger tank than the Nano, but the Nano is slightly sleeker in terms of the design of the box itself. The Evic Mini looks great as well and you can’t go wrong with any of those three you mentioned.

        • What autofiring issues have you heard about, and how common is it? I have the iStick 50w & love it. Haven’t had any trouble at all, and I’ve been using it daily for a few months. But if there are issues I should look out for, I’d like to know.

      • Amanda, I started 2 years ago with the Innokin MVP 20, and still using it! I felt really lucky that this was what I was sold to start with. The benefits of Innokins are they have powerful built in batteries, that charge with a mini usb port. You can also charge your cell phone with it. It fits almost all clearomizers,and tanks. Variable volts/ watts,on off button. Personally I think this is an excellent way to get started. I quit smoking tobacco the same week I began vaping, have never looked back! I’m just now upgrading my experience to the MVP 30 pro, so I can finally try a sub ohm tank.

    12. ” check out our article on “What is a box mod?””…putting that without putting the link isn’t very helpful. Still don’t exactly what one is and don’t feel like searching this site until I find the article.

      • Apologies Christopher. We were going to write the article straight after, but haven’t got around to it yet as we have just been so busy with reviews and other stuff. We should have an article up in the next month or so that will discuss all the types of vaping devices on the market and their pros and cons etc.

    13. I have a question guys I have a subtank mini kanger starter kit and I want to buy a SMOK TFV4 subtank but i dont know if it will fit on my kanger minibox

    14. I have a question guys I have a subtank mini kanger starter kit and I want to buy a SMOK TFV4 subtank but i dont know if it will fit on my kanger minibox

    15. I have the IPV4S and to me it is all I could need. Fingerprints do get on the screen but that’s not a big deal to me. I love it so much I can never put it down. I always have my dripper on it (a mutation x v2) and I can go to 120 with it but I always keep it at around 65 I found is the sweet spot with my coils. To me it could be a little better but im not one to complain I love to see people recognizing it thank you.

    16. Beginner- MVP20 and Sigelei 30
      Intermediate- MVP Pro kit and IPV 2 mini 70 watt
      Advanced Non Tc- Sigelei 150
      TC High End- SX Mini, Sig 150 TC, IPV3LI and IPV4S, Snow Wolf
      VOX, SMOK , EVIC VT either overpriced (VOX) or JUNK.

    17. Hey guys. I’m looking to do an upgrade. I have the iStick TC40W with an Atlantis V2. The battery life sucks and I’m just not getting quite the flavor out of the combo that I was told I would get. I’m looking for something a lot better, keeping short of rebuilding coils and dripping. Any suggestions would be greatly appreciated.

        • Linda meant the VIP Cig-a-likes and eGo devices.

          Linda: Those devices are really not that effective or publicly obsessed over in comparison to the devices aimed at more experienced users 🙂

          • Ah, okay. Thanks for the heads up, I guess cig-a-likes are still used for smokers picking up on vaping (seeming as you can find them in nearly every shop). To be honest, I think they should be picking up an eGo or some sort of regulated mod to start off with. The vapor, flavor and experience is just that much more than what you get with the cig-a-likes. Thanks Vaperex!

            • Yeah definitely I think cig-a-likes and eGos still make a up a lot of the market due to their wide availability.

              Not a bad thing as the worst they will do is reduce daily cigarette consumption and hopefully tickle new vapers curiosity to the more advanced and effective stuff 🙂

              Anyways, great post – ended up with an Evic Mini!

            • That is very true. Mind you I have a sneaky suspicion that some of the people buying these cig-a-likes expect more of them, thus are disappointed and go back to analogs. I guess you have to want to quit to like vaping. If not you are going to be one of the vape-haters. Thanks for the kind words, good choice! How is it Evic VTC Mini running for you?

            • Oh damn, that little bitch is running dayme gyyyyd!
              – I am running velocity rda, with fused clapton coil, and it is my fav regulated mod, to ma velocity! 😀

    18. For beginners, the k anger tech subox nano is nice, it doesn’t come with a battery so be prepared for that, but 70 for a sub ohm box mod that allows temp control all the way from 0.1-50 in .1 increments really isn’t bad. It’s my first sub ohm piece I’ve owned and I’m learning on it about temps, taste, clouds and coils on it. I always used to assume a higher temp was better, now with this piece I’m finding out more of the intricacies that different temps play on your vaping experience. Personally I use Charlies chalk dust dream cream and Cut wood bird brains (fruity pebbles flavor) on my box, box vape extremely nicely and the flavors are amazing

    19. I’m thinking very hard about the eifel T1. But I’m running on a very low vape budget and can’t afford to make a poor decision and regret it in a month.
      If I get it I’ll be running the T1 with a herakles tank and a Delta 2 I’ve just started building coils for.

      Is there another high wattage box I should be considering for 50$(ish) as opposed to the T1?

    20. Based on the reviews im thinking about getting a Koopor Plus with a Crown Uwell tank and i would like to know if this would be a decent combo. I was also wondering if you have done a review or tried Twelve Vapor?

        • Also try the Wismec RX200. Its a 200W device with temp control takes 3 18650 batteries. it might look like a big mod but it fits in the hand perfect. i have small hands and it feels good. And the best part about this device is that its only round $50.

    21. How about the rx200 from jaybo 45 bucks ft xmas code beats all!!!!!!!!!!!! Got a rta for you all to check out vctm from vaporz clouds builders dream with a 25mm and 30 mm decks .25 and .30mm holes in velocity style deck. Marry christmas to u and you’re family

    22. I’ve got a decent collection of these tanks and a few mods as well now. Been vaping since June and love the reviews on this site the way they’re done. Love that you test most coils and let everyone know where the flavor sweet spot is.

      (Most of)My collection: (FAVE)Smok X Cube 2(Black), Snow Wolf 200W, Sigelei 75W, Cloupor Mini Plus(White), (FAVE)TFV4 Mini,(Bl.), (FAVE)Crown Tank(Bl. & SS), TFV4(SS), iSub G, Zephyrus(plan to get Bl. V2!), UD Bellus, Atlantis V1&2, Herakles, Arctic, Phantom Micro, Hatrick Tank, Mutation X V4 & XS Mini, Atty3, Doge XV2, Tobeco Zorro & Vector, PSO Swirlfish, & HellBoy(clone). Also have tons of Wire, cotton, and TONSof tank coils lol. Along with TONS n TONS of eliquid! Thats just 6 months worth on small budget, would have lot more if I made more $$…

    23. You should also try out the hexohm v2.1 it’s a beast and goes well with the smok tfv4 minI and the sextuplet or quad coil

        • i just got the RX200 today and a wotofo rda and im also using my kanger subtank mini on it and its the best vape i ever had. im really surprised the RX200 isnt on here. Its a 200W mod with temp control and its like $50 in my opinion its a very great price for it.

    24. Also the kangertech Kbox 200 wasn’t on the list? Only mod that is TC on NiCr. Have not tried it yet, but how about a review?

    25. The best mods for vapes, boxes, and ecigs are at VaporFi! Head over to Save $10 on VaporFi (click) and upon checkout, an instant $10 discount will be applied to your purchase as a thank you for reading this Vaping360 post! The $10 discount is good on ANY PRODUCT on the VaporFi website! For example, if you buy one of our 30,000 juice flavors for $10, it is yours for FREE if you buy using this exclusive discount.Many products are only $10 which means it’s yours for 100% free! What do you have to lose?

    26. Hi
      I own Apollo Reliant 60 W TC and Phazer sub tank.I must admit sub tanks is not for me. I’m vaping almost 4 years now, and after I tried this combination above, I was quite disappointed.
      Started with severe cough, even worse than I smoked long time ago.
      Anw, I want go back to Aspire Nautilus Mini tank.
      My question is (maybe stupid):
      -can I use Apollo Reliant 60 W TC and if yes, how? Which settings?
      I know, Apollo uses 1,8 Ohm BVC coils but I can’t adjust Ohm..I can adjust temp. and wat’s..

      Greetings from Sweden.

      • Hi Max. Yes unfortunately “sub ohm vaping” isn’t for everyone. At least you now know it isn’t for you! If you are vaping the Nautilus on the 1.8 ohm coil, take a look at the wattage recommendation on the coil packs and use the Reliant in wattage mode at the suggested recommended wattage. If there are no recommendations start at around 5W and gradually go up to whatever is enjoyable for you (I’d guess around 10W is good, maybe slightly higher).

        • HI Chris
          Thank you for your fast response. Actually, one of your article here where you explaining everything about sub ohm vaping, helped me find a reason for my cough. I guess, I was in that mood where I don’t want admit that sub tanks isn’t for me at all.
          Thx again.

    27. Looking for a less conspicuous, single battery mod in the 75-90w range for work and car. Options look like Evic mini, IPV D3, Sigelei Spark, Wismec Presa, etc. Any favorites among these? The

      • I am currently using the D3 mod topped with an Aspire Cleito tank. The whole setup is only about the height of a can of beer but it throws clouds like nobody’s business. The battery life has been much better than anticipated. Even when I’m chain vaping, usually a fresh battery will last all day.

      • Eleaf iStick Pico is pretty good, only 75W though. It’s tiny, only a little bit bigger than the Artery Nugget, which I also have, but has a replaceable 18650 battery, which is great when many mini/micro mods have none replaceable batteries. Granted I’ve only had it a day and only used it with Aspire Nautilus and K1 tanks, looking to buy a sub-ohm RBA soon.

    28. The snow wolf 1.5 is one of my favorite boxes and I own DNA 200s vapor flask ect.

      The snow wolf packs a punch .

    29. When the SX Mini Q drops, definitely add it to the “High End” selection of the list. New Yihi chipset (SX450) & finally a series box with no extension tube from them!

    30. Please do a review on the twisted messes box mod. I’m lovin’ your site guys! More power! Thanks!

    31. Awesome compilation. Definitely very useful for a first timer. What’s your opinion on the following? Please note that I am a noob and have NO experience. I’d prefer to go for a starter kit at the moment for this reason, buy the juice and hit the ground running.

      1. Smok Micro One Starter Kit

      2. Joyetech Cuboid Mini 80W TC Starter Kit

      3. Innokin Cool fire4 Plus

      4. Kanger Topbox Mini Starter Kit

      5. Joyetech eVic VTC Mini (with CUBIS or Tron?)

      • Thanks Nishant! Personally I do not like the SMOK Micro One kit.

        Here are my favorites:

        1. Innokin Coolfire IV Plus Kit
        2. Joyetech eVic VTC Mini + Cubis
        3. Joyetech Cuboid Mini 80W TC

        I personally do not like the others mentioned.

    32. I have a reuleaux rx200 using it with a smok tfv4 and 3 samsung 18650 batteries but the problem is that they get empty pretty fast is that normal?

    33. Hey so I just purchased the crown tank I love it ! But o have the beginners Eleaf 50w so I can’t really vape as high as I want to with all the coils they offer. Any suggestions of a great box mod for a great value. Thanks !!

    Comments are closed.