Best vape mods and box mods of 2018

In our detailed best of list we take a look at the best vape mods & box mods on the market. Our list comprises beginner vape mods, high powered mods, compact mods and all-in-one vape mods. Our best vape mod list is based on the vape mods we have tested so far and those highly recommended to us by close friends and fellow experts.

Not everyone will agree with our list, but we hope it will provide readers with a clear overview of some of the best mods on the market. We will be updating the top box mods article as we review more devices going forward. Please take into consideration that there are many new mods coming out on a daily basis, therefore it might take a while for the best ones to make it onto our list.


Best entry level vape mods

  • Ideal for beginners / smokers
  • Compatible with most 510 drip tips
  • LED battery life indication
  • Great flavors available
  • 17 W output
  • Wide airy draw
  • Compact yet satisfying
  • No messy refilling required
  • 900 mAh battery life
  • Impressive cloud production
  • Cons
  • Not suitable for MTL vaping
  • Not available in 0 mg nicotine
  • Limited flavor selection (for now)
  • Specifications

    • 17 W output
    • 1.5 ohm resistance
    • 10-second continuous fire with auto shut-off
    • Micro USB charging port
    • Compact 22 x 47.5 x 60 mm design
    • 900 mAh battery
    • Overheat protection
    • Short circuit protection

    Box mods can be complicated, but they don’t have to be. Aspire has created a miniature box mod that delivers massive flavor. They put all the best features from their most advanced products, into a simple and compact device. Whether you’re new to vaping, or a seasoned vet, you will get pleasure from this device.

    With the Aspire Gusto Mini, you won’t need to fuss with refilling juice, buying coils and replacing batteries. Just pop in a new pod and you’re ready to vape. No mess, just pure vaping satisfaction. Excellent for transitioning from smoking, due to its simplicity. A perfect all-in-one vape mod for beginners who want a little more power.

    The Gusto Mini bears resemblance to the Plato, but smaller and easier to operate. Complete with all the necessary safety features such as overcharge, discharge and short-circuit protection. Featuring a 900 mAh battery, a 4.2-mL juice capacity and 1.5 ohm coils. Enjoying vaping is now easier than ever.

  • Supports 25 mm atomizers
  • Colorful design
  • 85 W of power
  • Easy to fill tank
  • Cons
  • Acrylic decals look cheap
  • Impractical to use at 85 W
  • Protruding battery cap
  • Specifications

    • Dimensions: 2.78 x 1.89 x 0.98 inches
    • 510 threaded
    • Wattage Output: 1 - 85 W
    • Temperature control: Ni200 / Titanium / SS316 / TCR modes
    • Temperature control: 100 - 315C / 220 - 600F
    • Bypass mode
    • Preheat functionality
    • Stealth functionality
    • 0.91-inch OLED display
    • Side micro USB charging port
    • Firmware upgradeable
    • Dual-circuit protection
    • Requires 1 x 18650 high drain battery

    The Pico is back! Imagine your favorite 25 mm attys on one of the smallest single 18650 mods ever made. Eleaf has made that possible with the new iStick Pico 25. This starter kit includes the ELLO tank, which has a convenient top-fill method that makes refilling your tank a breeze.

    The mod features a three piece design, with colorful acrylic panels. The mod goes up to 85 watts with full TC abilities and upgradeable firmware. If you love the Pico, but also want to use larger atomizers, now you can. Combined with the ELLO, this is an excellent and versatile starter kit.

    Save 5%
  • Tried and true design
  • Trusted Halo name
  • Good customer service
  • Includes juice and tank
  • Perfect for beginners
  • Great battery life (4400 mAh)
  • Comfortable size
  • Cons
  • Charging port located on top
  • No advanced features
  • Specifications

    • Battery logo: Halo / flame
    • Battery color: no
    • Battery thread: stainless steel
    • Button color: no
    • Battery type: manual
    • Battery cut-off time: 10 seconds
    • Battery length: 83.0 mm
    • Battery width: 45.0 mm
    • Battery capacity: 4400 mAh
    • Battery charge: no
    • Battery lifespan: 300 cycles
    • Battery voltage type: variable
    • Battery actual voltage: 2 - 10 volts
    • Battery rated voltage: No
    • Battery warranty: 60 days from date of purchase

    Finding your first vape can be difficult at first, but it just got easier thanks to Halo. This kit will give you everything you need to start including juice, a tank and mod. All of the features you would find on mods such as the Eleaf iStick, but from Halo. A company that is trusted by vapers.

    Most starter kits don’t have the newbie in mind, and require additional purchases. E-liquid, 18650s, coils, it can be very frustrating. This kit uses an internal battery just like a smart phone. You can start out on a lower setting and graduate to chucking fat clouds before you know it.

    Save 10%
  • One of the slimmest mods
  • Intuitive menu system
  • Ideal for beginners/stealth vapers
  • Good build quality
  • Good value for price
  • Kit includes a proper tank for it
  • Cons
  • Lacks modes
  • Won’t fire below 0.6 ohms
  • Overhang with atomizers above 15 mm
  • Specifications

    • Size: 36.6 x 15.0 x 128.5 mm
    • Weight: 144.36 g
    • E-liquid capacity: 1.8 mL
    • Battery capacity: 1500 mAh
    • Maximum charging current: 2 A
    • Thread type: 510 threaded
    • Output wattage: 1-30 W
    • Output mode: VW
    • Resistance range: 0.6-3.0 ohm
    • Colors: brushed silver / rose gold / gold

    This mod was designed for your pocket. If you’re just getting in to vaping, or just need a stealthy setup, this is for you. The Eleaf Basal has an internal 1500 mAh battery that goes up to 30 watts. It features 2-amp fast charging and can be vaped while charging. It’s simple, functional and portable.

    The Basal doesn’t have any complicated menus or features to learn. It is intuitive and easy to operate. The mod has a beautiful metallic finish and is available in gold, rose gold and silver. The full kit comes with a matching GS Basal tank; a slim mouth-to-lung tank that uses flavorful GS Air coils.

    Save 10%
  • Stealthy and pocketable
  • Comfortable form factor
  • Responsive touch screen
  • Easy to use
  • Accurate TC and wattage output
  • Secure battery door
  • Cons
  • Limited to 60 watts in TC mode
  • USB port concealed by battery door
  • Defaults to SS316 with a new battery
  • Specifications

    • Dimensions: 76 x 25 x 40 mm
    • Powered by the GX 80 HUT V2 chip
    • Requires an 18650-sized battery (not included)
    • Acceptable resistance range: 0.1 - 3.0 ohm
    • Output power range: (power mode): 5.0 - 80.0 watts
    • Output power range (temperature control mode): 5.0 - 60.0 watts
    • Maximum power output: 7.5 volts
    • Maximum output current: 35.0 amps
    • Input voltage range: 3.2 - 4.2 volts
    • Working current of the display screen: 25 mA
    • Standby working current: less than 350 uA
    • Firing cut off timer: 10 seconds
    • Standby time 18 seconds
    • Work efficiency: 94%
    • Positive contact protector

    This mod looks simple but is packed with tons of features. The Asmodus Colossal is a single 18650 device with a pocketable form factor. It does 80 watts of power and is complete with TC mode for SS, Ti and Ni. The Colossal uses an updated chipset and a touchscreen reminiscent of the Minikin series.

    The touchscreen interface has been improved and is more sensitive than ever. Swipe and tap with ease to adjust your settings. The mod features a hidden USB port and a rugged stainless steel 510. The Asmodus Colossal is a dependable stealthy device complete with all the essential safety features.

    Save 10%
  • Compact form factor
  • Center-mounted 510
  • Full TC support
  • Charges quick
  • Gold-plated 510 contact
  • 2000 mAh internal battery
  • Cons
  • Boxy shape
  • Button rattle
  • Can’t disable auto shutoff
  • Specifications

    • 5 to 50 W
    • 0.1 to 3.0 ohm atomizer range
    • 0.5 to 8 V output
    • Bypass mode
    • Output based on resistance and battery state
    • On and off capable
    • Temperature control suite
    • Ni200 nickel support
    • Titanium support
    • SS316 support
    • TCR (M1/M2/M3)
    • Built-in 2000 mAh battery
    • Battery charging protection
    • 0.96-inch OLED screen
    • Temperature mode and output
    • Output power
    • Atomizer resistance
    • Battery life indicator
    • Puff counter
    • Ergonomic size and shape
    • Three button control
    • Oversized firing button
    • Adjustment buttons
    • Micro USB charging port
    • 1.5 A quick charge
    • Stainless steel 510 threaded
    • Gold-plated contact
    • Low Voltage/check atomizer/short/no output/battery protection

    The Nugget returns. This time it includes a larger 2000 mAh built-in battery and fires up to 50 watts. It also has a full temperature control suite, battery life indication and 1.5 A quick charging via micro USB. The Artery Nugget X features a 0.96-inch OLED screen all in a similar form factor to the original.

    If you’re looking for a compact but powerful device, this is the one. The Nugget series has proven to be a solid stealth vape in the past and this one follows that tradition. Other features to note are its easy-to-use interface, wattage curves and protection features. The full kit includes the AT22 tank.

    Best 0 - 100W box mods

  • Waterproof
  • Virtually indestructible
  • Can take 18650 or 26650
  • 100 watts on a single battery
  • Nice button
  • Fine leather
  • Rugged steel C-frame
  • Cons
  • A bit heavy
  • Specifications

    • Size: 37.8 x 46.8 x 88 mm
    • Max power output: 100 W
    • Instantaneous firing: 0.015 s
    • Max firing duration: 10 s
    • Max voltage duration: 9V ± 0.1 V
    • Output mode: VW / VPC / TC / TCR / bypass
    • Resistance range: 0.05 - 3 ohm
    • Material: aluminum + zinc alloy + silicone
    • Battery: 1 x 26650 / 18650 cell (not included)
    • Temperature range: 100 - 315℃ / 200-600℉
    • Operating temperature: -40℃ – 80℃
    • Level: IP67 waterproof and dustproof MIL STD 810G - 516.6 military-grade shockproof

    A beauty and a brut! The Geek Vape Aegis is waterproof and it’s a virtually indestructible 100-watt mod that operates on a single 18650 or a 26650 for increased battery life. The build quality of this mod is unbelievable, and the ergonomics of the Aegis feel great in the hand.

    The Geek Vape Aegis fires down to 0.05 ohms with a max output of 100 watts, and it’s got TCR, all TC modes, wattage curves, and a thick LED screen. The atomizer platform is ~35 mm which means most tanks will fit on it without overhang.

    Save 5%
  • Comfortable feel
  • Easy to operate
  • Great battery life (5000 mAh)
  • 80 watts capable
  • 10 user profiles
  • Trusted name
  • Customizable logo
  • Cons
  • Charging port on the bottom
  • Menu may require learning
  • Specifications

    • Battery cut-off time 10 seconds
    • Battery length: 84 mm
    • Battery width: 50 mm
    • Battery capacity: 5000 mAh
    • Battery charge: no
    • Battery lifespan: 300 cycles
    • Battery voltage type: variable
    • Battery actual voltage: no
    • Battery rated voltage: no
    • Battery warranty: 60 days from date of purchase

    The Halo Reactor Mega delivers all the functionality in all of the best vape mods. Everything is included in this easy-to-use setup from a name that vapers can trust. It is compact and stylish. If you’ve been thinking about upgrading to a box mod, look no further. It even comes with their famous e-juice!

    The Reactor Mega box mod is loaded with tons of battery life (5000 mAh) and can put out 80 watts. It also has temperature control and smart mode, which can store 10 different user profiles. The starter kit includes the Reactor Mega tank which is a perfect addition to this vaping setup.

    Best 100-300W+ box mods

  • Responsive vivid touch screen
  • Intuitive interface
  • Temperature control
  • Great for mid to high wattage vaping
  • Lateral firing bar
  • Strong magnetic battery door
  • Available in a variety of colors
  • Suitable for 25 mm atomizers
  • Cons
  • USB port located on the bottom
  • Battery door hard to open
  • Fingerprint magnet
  • Specifications

    • 52 x 27.3 x 85 mm
    • 510 threaded
    • Wattage output: 1.0 - 230.0 W
    • Variable temperature control: nickel / titanium / stainless steel 316
    • Temperature control range: 200 - 600F / 100 - 315C
    • Resistance range: 0.06 - 3.0 ohm for temperature control mode
    • Resistance range: 0.1 - 3.0 ohm for variable wattage
    • Touchscreen display
    • Shatter-resistant high-strength toughened glass
    • Hidden fire side button
    • OLED display
    • Zinc alloy construction
    • Requires (2) high amp 18650 batteries (sold separately)
    • Micro USB charging port

    Looking for a good touch-screen mod? The G Priv 2 is SMOK’s latest advancement in their G Priv line. It does everything as the first version, and much more, in a slimmer and more lightweight package. The SMOK G Priv 2 also has an updated interface so you won’t need to be a pro to navigate its menu.

    The mod is listed at 230 watts using two 18650s. It features a noticeably brighter high-definition 2-inch display with highly-responsive touch screen abilities. It is capable of temperature control with customizable TCR and preheat functionality. The G Priv 2 is available in 7 awesome color variations.

    The full kit includes a matching X-Baby sub ohm tank, so you can chuck clouds straight out the box.

  • Accurate temperature and wattage output
  • Easy to use interface
  • Good build quality
  • Sleek and comfortable to hold
  • Accommodates up to 28 mm atomizers
  • Big bright full-color display
  • Cons
  • Unnecessary button above fire bar
  • Specifications

    • Dimensions: 43.6 x 30 x 83.4 mm
    • Weight: 147.3 g
    • Thread Type: 510 spring-loaded connector
    • Utilizes (2) High-amp 18650 batteries (sold separately)
    • Output Mode: VW / TC-Ni / TC-Ti / TC-SS / TCR mode
    • Output Wattage: 1-230 W
    • Resistance Range: 0.05-1.5 ohm for TC modes
    • 0.1-3.5 ohm for VW mode
    • Temperature Range: 100-315°C / 200-600°F (TC modes)
    • Maximum charging current: 2 A
    • Maximum output current: 50 A
    • Output voltage range: 0.5-9 V
    • Large 1.45-inch color display
    • 2 A max charging current for quick charge
    • Dual-circuit protection
    • Reverse-polarity protection

    The Ravage 230 is Wismec’s follow-up to the popular Predator mod. It looks similar, but they have improved everything about it. Color screen, centered 510 and a fantastic paint job to name a few. They even added an extra button to make navigating through the menu easier than ever before.

    The Wismec Ravage 230 is an excellent performer. It does accurate wattage and temperature control for a dual-battery device. It provides more than enough power for any style of vaping. The mod is loaded with great features such as customizable preheat and TCR modes. It has a stunning paint job and is designed to fit nicely in your hand. The Ravage is everything the Predator wanted to be.

  • Accurate wattage output
  • Easy-to-use menu system
  • Good build quality
  • Simple and sleek
  • Good 510 pin
  • Bright 1.45-inch color screen
  • Compact size
  • No overhang with up to 28 mm atomizers
  • Affordable
  • Cons
  • Inaccurate temperature control
  • Specifications

    • Mod size: 43 (L) x 28 (W) x 84 mm (H) 
    • Screen type: 1.45-inch TFT color screen
    • Screen resolution: 240 x 320 dpi
    • Output wattage: 1-200 W
    • Output mode: Power/RTC/TC(Ni/Ti/SS316)/TCR modes
    • Resistance range: 0.05-1.5 ohm for TC/TCR mode
    • 0.1-3.5 ohm for power mode
    • Temperature range: 100-315°C/200-600°F
    • Battery using: dual replaceable high-rate 18650 cells (CDC 25 A)
    • Max charging current: 2.0 A
    • Max output current: 50 A
    • Max output voltage: 9 V

    The ESPION is a classy mod for distinguished vapers. It has a high-end appearance at an affordable price. It also performs well, especially in wattage mode. A dual-18650 device that is capable of 200 watts, complete with preheat functionality and a big beautiful 1.45” easy-to-use color touch screen.

    The Joyetech ESPION is compact for such a powerful device. It fits nicely in the hand or in your tuxedo pocket. It utilizes quick 2-amp USB passthrough charging so you never have to go another minute without vaping. The mod also has a built-in clock and all the necessary safety protections.

  • Accurate power output
  • Good temperature control
  • Easy-to-use menu system
  • Sleek ergonomic design
  • Good build quality
  • Bright screen
  • Wattage curve mode
  • Pre-heat option
  • Good paint job
  • Cons
  • Plastic battery door
  • Overhang with atomizers above 25 mm
  • Specifications

    • Dimensions: 50 x 33 x 91 mm 
    • Dual 18650 batteries (not included) 
    • Power range: 5-210 watts 
    • Voltage range: 0.5-9 volts 
    • Minimum atomizer resistance: 0.05 ohms 
    • Temperature control range: 200-600 F 
    • Wire compatibility: Ni200| titanium| SS316  
    • TCR mode – 3 memory slots 
    • CPS mode – 3 memory slots
    • Bypass mode 
    • Preheat functionality 
    • Ergonomic contour 
    • Intuitive 1.3-inch touch-screen display 
    • User-friendly interface 
    • Stealth firing button 
    • Magnetized battery door cover 
    • Micro-USB port – capable of firmware upgrades 
    • Automatic cutoff 
    • Over-discharge protection 
    • Short circuit protection 
    • Reverse polarity protection 
    • Overheating protection 
    • Overcharging protection 
    • 510 connection

    The Skystar is the latest touch-screen mod by Aspire. Tap and swipe to adjust your settings, just like a smartphone. This mod puts out accurate wattage and precise temperature control using two 18650s. It also has a smooth rounded aesthetic that makes it comfortable to hold and attractive to look at.

    The device features a 1.3-inch touch screen interface for navigating through the menu and a discrete firing button. Its bright screen displays all the information you need in an organized fashion. The mod is also complete with safety features such as overheat, overcharge and reverse battery protection. The Skystar mod comes in 5 stunning finishes, is firmware upgradeable and even has a built-in clock.

    Save 10%
  • Solid build quality
  • Comfortable firing bar
  • 2-amp charging
  • Two user interfaces
  • Real leather panel
  • Good value
  • Very responsive
  • Accurate power output
  • Large color display
  • Cons
  • Chunky
  • Left-handed orientation
  • No battery orientation markers
  • Overhang with above 25 mm atomizers
  • Specifications

    • Mod size: 92 x 60 x 31 mm
    • Output wattage: 1-218 W
    • Voltage: 6.4-8.4 V
    • Material: zinc alloy/leather
    • Output modes: VW/VW curves/temp(Ni/Ti/SS)/TCR/TC curves
    • Cattery: Dual 18650 batteries (not included)
    • Screen: 1.3-inch TFT colorful screen
    • Temperature Range: 200-600°F/100-315°C
    • Resistance: 0.1-5 ohm for VW mode
    • 0.05-2.0 ohm for TC (Ni/Ti/SS/TCR/TC curve)
    • Thread: 510 thread
    • Reverse protection/over-heating protection/low voltage protection/overload/short-circuit protection/over-time protection

    The Ranker is the latest advancement from Smoant since the well-received Cylon mod. It utilizes their most recent chipset which fires with virtually no delay using dual 18650s. This super responsive mod is firmware upgradable. It also has a colorful 1.3-inch OLED screen with 2 user interface options.

    The Smoant Ranker is customizable in every way. It allows you to upload your own custom wallpaper designs in addition to adjustable TCR and temperature and wattage curves. The mod also has a big firing bar and real leather panels for a luxurious and ergonomic experience. Available in 3 designs.

  • Accurate wattage/temperature output
  • Accurate wattage curves
  • Pre-heat options
  • Intuitive user interface
  • Solid build quality
  • Sleek simple design
  • Centered 510 pin
  • Bright screen
  • Pre-heat functionality
  • Comfortable ergonomics
  • Swappable color panels
  • Customizable LED patterns/colors
  • Cons
  • Temp mode runs a little hot (keep it under 450°F)
  • Slight overhang with 30 mm atomizers
  • Specifications

    • Dimensions: 89 x 53 x 31 mm 
    • OMNI board 2.6 
    • Zinc-alloy construction 
    • Powered by two high-amp 18650s (sold separately) 
    • Output mode: VW / TC-Ni / TC-Ti / TC-SS / TCR-M1
    • M2 / CCW (VW curve mode) / CCT (TC curve mode) / bypass 
    • Drawing power: soft / normal / high 
    • Wattage range: 5 – 220 watts 
    • Resistance range: 0.05 – 5 ohms 
    • Temperature range: 100° C - 315° C / 200° F - 600° F 
    • Smart VW mode 
    • Interchangeable exterior casing 
    • 0.96”-OLED display 
    • Real time clock (RTC) setting 
    • Puff counter/timer 
    • 16-tier brightness setting 
    • Displays remaining charging time 
    • Virtual display keys 
    • Hinge & lock battery door 
    • Spring-loaded gold-plated 510 pin 
    • 2.5-amp micro USB balanced charging 
    • Firmware upgradeable 

    Switch up your vape game. The Vaporesso Switcher is the latest device to build off the success of the Revenger X and Revenger Mini. It provides accurate wattage outputs and temperature control vaping courtesy of the latest OMNI 2.6 chipset. The mod uses swappable color panels for a customized look.

    It doesn’t just perform well. The Switcher LE edition is equipped with LED lights in a wide range of colors and functions. It’s like having a disco party in the palm of your hand. The kit comes complete with the NRG tank, which is one of the best sub ohm tanks you can get for chucking flavorful clouds.

  • Squeezable firing bar
  • Soft/normal/hard modes
  • Compact dual 18650 mod
  • Intuitive user interface
  • Individual battery life indication
  • Internal temperature monitoring
  • Supports coils down to 0.06 ohms
  • Great battery life for a dual battery device
  • Cons
  • Slight overhang with 25 mm attys
  • Stiff battery door
  • Won't fire below 6 watts
  • Specifications

    • Dual high-amp 18650
    • Dimensions: 85 mm by 44 mm by 30 mm
    • Wattage output range: 6 - 220 W
    • Min atomizer resistance: 0.06 ohm
    • Temperature range: 200 - 600F
    • Supports Ni200 / Ti and SS heating elements
    • Premium zinc alloy construction
    • Detail-orientated OLED display
    • Series connection
    • Dual battery life indicator
    • Stealth firing mechanism
    • Ergonomically-placed adjustment buttons
    • Hinged battery cap
    • Micro USB port - firmware upgradable
    • Alien V1.2.2 firmware upgrade
    • 510 connection

    The SMOK Alien 220W TC is one of the first mods to feature a squeezable firing system. The device is stealthy for a dual 18650 device. It has a secure locking battery door and a bright OLED screen. The Alien displays all your vital information in a neat and organized fashion.

    Other noteworthy features include full temperature control functionality with custom TCR and three different preheat modes. It also offers custom user profiles, individual battery monitoring and all of the performance you would come to expect from SMOK. The full kit comes with the Baby Beast sub ohm tank so you can get huge vapor and excellent flavor right out of the box.

  • Durable
  • Real time clock
  • Powerful chipset
  • Centered 510 connection
  • Comfortable firing button
  • Fits up to 28 mm atomizers
  • 2.5 A charging compatible
  • Cons
  • Attracts fingerprints
  • User interface requires patience
  • Slight button rattle
  • Specifications

    • Max output wattage: 220 watts
    • Wattage range: 5 - 220 watts
    • Voltage range: 0 V - 8.5 V
    • Resistance range: 0.05 - 5Ω
    • Temperature control range: 100 - 315℃ / 200F - 600F
    • Output Modes: VW (H / N / S) / CCW / CCT / VT (NI / TI / SS) / TCR (M1-M2) / RTC / bypass
    • Battery: 2 x 18650 (not included)
    • IML Case
    • OMNI board 2.0 chipset
    • Dual battery indicators
    • Voltage / wattage / resistance indicators
    • Remaining charging time indicators
    • Real-time clock display
    • Charging equalization system

    The Vaporesso Revenger 220W TC is one of the first mods to utilize IML injection coating which fuses style with durability. The mod utilizes Vaporesso’s OMNI 2.0 chipset which allows full user customization of wattage and temperature curves to satisfy even the most technical vapers.

    The Revenger is powered by two 18650’s protected by a solid magnetized door. It puts out a serious amount of juice for some massive clouds. Other special attributes include a real time clock, firing capabilities down to 0.05 ohms and a variety of output modes and a 0.96-inch screen.

  • Customizable wallpaper/fonts
  • Joystick controller
  • Real-time clock
  • Authentic carbon fiber decals
  • Oversized centered 510 connection (fits 30 mm atomizers)
  • Bluetooth connectivity
  • YiHi SX550J chipset
  • Cons
  • Joystick controller protrudes
  • Not ideal for pocketing
  • Chunky design
  • Non-micro USB charging port
  • No visual indication for each cell
  • Specifications

    • Chipset: YiHi SX550J
    • Max output wattage: 200 watts
    • Max output current: 50 amps
    • Max output voltage: 9.5 volts
    • Temperature control compatible
    • Temperature control range: 212 - 572°F (100°C - 300°C)
    • Resistance range: 0.15 - 3.0 ohms
    • Temperature control resistance range: 0.05 - 0.3 ohms
    • Max Input Current: 40 A
    • Single battery / Dual battery convertible
    • Requires 2 x 18650 high amp batteries (sold separately)
    • Bypass mode
    • Joystick control
    • Bluetooth app compatible (Android & iOS)
    • SX pure technology
    • Compatible with SS / Ti / Ni coil types
    • Customizable wallpaper
    • Reverse polarity
    • Output short protection
    • Low resistance
    • Battery low voltage protection
    • Temperature overheat protection
    • Battery overcharge protection
    • Customize your logo & menu name
    • Firmware upgradeable
    • Adjustable screen brightness
    • Adjustable standby time
    • Anti-dry burning technology

    The SX Mini G Class 200W TC utilizes a unique joystick control system to easily navigate through its menu. The mod syncs up via Bluetooth so you can fine tune your settings using your phone or tablet. The SX550J chipset also allows you to fully customize wallpaper and fonts.

    The device does accurate temperature control for your favorite temp wires, custom TCR and utilizes SXi-Q Intelligent Taste Curve technology. The G Class is capable of balanced 2 A charging of both 186550 batteries which is monitored by a vivid full-color OLED display.

  • Excellent build quality
  • Tasteful branding
  • Carbon fiber and resin available
  • Easy to use software interface
  • Relatively small size
  • Excellent performance in VW and TC
  • One-watt adjustment increments
  • Cons
  • No rounded edges
  • Not a lightweight mod
  • Specifications

    • Size: 90 x 54 x 24 mm
    • Weight: 212 g (298 g with batteries)
    • Material: zinc alloy / carbon fiber
    • Batteries: 2 x 18650 (not included)
    • Working voltage: 6.4 - 8.5 V
    • Working current: 1 - 40 A
    • Output voltage range: 0 - 7.5 V
    • Output current range: 0 - 40 A
    • Resistance range (VW): 0.05 - 3.0Ω
    • Resistance range (TC): 0.05 - 1.5Ω
    • Output power: 5 - 157 W
    • Charging voltage: 5 V
    • Charging current: 1800 mA
    • Standby current: 10 µA
    • Temperature range: 200 - 600℉ / 100 - 315℃
    • Heating elements supported (TC): Ni/Ti/SS
    • Working efficiency: 95%
    • Firmware upgradeable: yes

    Don’t let the name fool you. The Voopoo Drag is no joke. Loaded with features including a full temp control suite, super mode, and accurate power output, courtesy of the Gene Fun chipset. The mod fires within 0.025 seconds of engaging the button, powered by two 18650 batteries.

    The Voopoo Drag pays homage to the original box mods with a boxy aesthetic. Its features are what sets this mod apart. Much like the Vaporesso Omni chipset, the Drag allows you to control heating curves, customize settings and even insert a custom logo. Available in carbon fiber and resin in a variety of colors. The Voopoo Drag is a dependable workhorse for your daily lifestyle.

  • Durable
  • Real-time clock
  • Powerful OMNI chipset
  • Centered 510 connection
  • Comfortable firing button
  • Fits up to 28 mm atomizers
  • 2.5 A charging
  • Cons
  • Attracts fingerprints
  • Slight button rattle
  • Specifications

    • Size: 45 x 89 x 28 mm
    • Display: 0.96-inch OLED
    • Brightness: 16 tier adjustment
    • Button: 1 physical fire button/3 responsive touch buttons
    • Haptic pattern: mobile-specific vibration motor
    • Sensory accommodation: 8-tier vibration adjustment
    • Startup speed: less than 0.1 s
    • Temperature Control Range: 100-315°C / 200-600°F
    • Output Modes: VW(H/N/S)/CCW/CCT/VT(Ni/Ti/SS)/TCR(M1/M2)/RTC/bypass
    • Battery: Dual 18650 (not included)

    The Vaporesso Revenger X is the latest advancement in the Revenger series. This time they added a touch screen improved user interface. The mod utilizes Vaporesso’s OMNI 2.0 chipset which allows full user customization of wattage and temperature curves to satisfy even the most technical vapers.

    The Revenger X is powered by two 18650’s protected by a solid magnetized door. It puts out a serious amount of juice for some massive clouds. Other special attributes include a real time clock, vibrational “haptic” feedback, a variety of output modes and a large bright 0.96-inch screen.

    Save 10%
  • Stunning aesthetics
  • Comfortable form factor
  • Large responsive fire button
  • Lightweight and durable
  • Uses dual 18650/20700 or 21700 cells
  • Powerful wattage output
  • Solid battery door
  • Includes battery adapter
  • Big bright screen
  • Cons
  • Battery rattle with 2700s
  • Slight wiggle with some atomizers
  • Overhang with atomizers above 25 mm
  • Specifications

    • AS chipset
    • Temperature control suite
    • 0.96-inch color display
    • Magnetic battery panel
    • Accepts dual high amperage 18650/20700/21700
    • (PPS + fiberglass) + stainless steel construction
    • Update and charging capability
    • Spring-loaded gold-plated 510 connection
    • Reverse polarity protection/short circuit protection/low voltage/overheat

    The Blade by Geekvape is lightweight, durable and nice to look at. It utilizes dual 20700s, 21700s or 18650s with included adapter. The mod has a large bright color screen, oversized power button and a strong battery door. It’s made of aircraft grade material featuring a unique and vibrant paintjob.

    Using the AS chipset, the Blade pushes out over 200 watts of power and fires down to 0.005 Ohms. The chip is extremely responsive and fires instantaneously when activated. It also does temperature control and has a bypass mode. This is a versatile mod suitable for just about every style of vaping.

    Save 10%
  • Accommodates up to 30 mm atomizers
  • Three menu styles to choose from
  • Huge bright round color display
  • Intuitive user interface
  • Sports car inspired design
  • 800-microsecond instant output
  • Cons
  • Weak battery door
  • Chunky form factor
  • Specifications

    • Size: 89 x 55.8 x 32 mm
    • Main material: zinc alloy 
    • Display: 1.3-inch TFT circular screen
    • Wattage range: 10-230 W
    • Temperature range: 100-300°C/200-570°F
    • Voltage input: 6.4-8.4 V 
    • Voltage output: 1.0-7.5 V
    • Maximum current: 38 A
    • Battery support: 2 x 18650  
    • Modes: power/SS316/SS317/ Ni200/ TCR/ Ti1
    • Resistance range: 0.05-3.0Ω
    • Coil supporting: nickel chrome / stainless steel (316/317/304) / titanium wire/ nickel 200 / TCR 
    • Charging support (micro USB): DC 5 V/2.5 A
    • Support software upgrade

    The Top 1 is a sportscar-inspired mod by Sigelei. It runs on two 18650 cells and provides loads of power and full TC support. It has presets for various types of stainless steel in addition to adjustable TCR functionality. The Sigelei Top 1 has a massive 1.3-inch screen with 3 menu styles to choose from.

    The mod is constructed from zinc alloy with carbon fiber decals. It has a luxury look and feel for fans of luxury cars and watches. Its centered 510 pin lets you to use up to 30 mm atomizers without overhang. The user interface is simple to operate, and its large screen is very easy to read.

  • Updated interface
  • Big 2-inch color display
  • Easy to navigate
  • Three output modes
  • Full TC support
  • Large firing mechanism
  • Cons
  • Fingerprint magnet
  • Small adjustment buttons
  • Specifications

    • Size: 88 x 46.5 x 30.4 mm
    • Wattage Range: 6-225 W
    • Voltage Range: 0.5-9 V
    • Standby Current: less than 500uA
    • Batteries: 2 x 18650 batteries (not included)
    • Resistance: 0.1-2.5 ohm(VW)/0.05-2 ohm(TC)
    • Temperature Range: 200-600°F/100-315°C

    Introducing SMOK’s best mod to date. If you loved the Alien, then you’re gonna love this one. The SMOK X-Priv is a stylish box mod with loads of power. It takes dual 18650s and features a large side firing bar. The X-Priv has a huge color screen with a similar user interface to the ProColor mod.

    The device is made of zinc alloy and has a carbon fiber pattern on the battery door to match the TFV12 Prince tank. The X-Priv has full temperature control capabilities with adjustable TCR and three output modes: hard, normal and soft. The full kit includes the cloud-chucking Prince sub ohm tank.

    Best compact box mods

  • One of the smaller single battery devices
  • Squeezable firing switch
  • Fires down to 0.1 ohms
  • Bright OLED screen neatly displays vital information
  • Fits up to 25mm atomizers
  • Cons
  • Threading on battery cap are a bit crunchy
  • Hard to remove battery in case of venting
  • Specifications

    • Single high-amp 18650 battery
    • Dimensions: 71 x 48 x 27 mm
    • Wattage output range: 1 - 85 W
    • Min atomizer resistance: 0.06 ohm
    • Temperature range: 200 - 600F
    • Supports Ni200 / Ti / SS heating elements
    • Memory mode
    • Hard/norm/soft modes
    • Premium zinc alloy construction
    • Full-matrix OLED display
    • Stealth firing mechanism
    • Ergonomically placed adjustment buttons
    • Top-loaded threaded battery cap
    • 510 connection

    The AL85 by SMOK puts all the things people love about the Alien, in a much smaller package. Capable of pumping out 85 Watts using a single 18650 battery, this mod fires down to 0.1 ohms. Much like its predecessor, the AL85 has carbon fiber decals and a side-firing switch.

    The SMOK AL85’s display provides information displayed in real time, just like its big brother. It has full temperature control functionality with adjustable TCR plus three memory settings. The kit comes with the Baby Beast, a killer combo for any stealthy flavor chaser.

  • Very portable
  • Includes everything you need
  • Free shipping
  • Superior customer service
  • More than enough power
  • Ideal for beginners
  • Cons
  • Protruding battery cap
  • Overhang with above 23 mm atomizers
  • Proprietary USB charging
  • Specifications

    • Battery logo: Halo / flame
    • Battery color: no
    • Battery thread: stainless steel
    • Button color: no
    • Battery type: manual
    • Battery cut-off time: 10 seconds
    • Battery length: 71 mm
    • Battery width: 45 mm
    • Battery capacity: 2000 mAh
    • Battery charge: no
    • Battery lifespan: 300 cycles
    • Battery voltage type: variable
    • Battery actual voltage: no

    If you’re still making the transition from smoking, finding the perfect setup can be confusing. The Halo Reactor Shorty kit provides everything need to quit cigarettes and start vaping. It gives you a powerful mod and sub ohm tank in a fun-size package. It even comes with the battery and juice!

    If you want advanced features such as temp control, the Reactor’s got it. Giving you all the features of the popular Eleaf Pico, backed by a trusted American brand. Halo also happens to make some of the best e-liquid around. The only thing you’ll worry about is picking a flavor.

    Vape mods explained

    best box mods

    What is a vape mod?

    A vape mod is a power source, essentially a case that contains one or more rechargeable batteries, that supplies electricity to a vaping atomizer. They are also referred to as “vapor mods”. The term “mod” has its origins in the early years of e-cigs, where hobbyist vapers “modified” existing electrical hardware (cases, batteries, wiring, etc.) for custom use as vaping hardware.

    Now all e-cig power sources are called mods. Box mods are one of two primary types of power sources, with tube mods being the other. Almost universally, box mods have a firing switch or button. Press the switch and the atomizer gets power from the mod and “fires”, vaporizing eliquid with the instantly heated coil. Release the button, and the power is cut off.

    Different types of box mods

    Box mods come in different designs, configurations, and aesthetics. They may be constructed with fixed internal LiPo batteries that recharge via USB cables or with removable Li-Ion batteries that can be recharged either via USB or outside the mod in a dedicated charger. The majority of USB-recharged box mods allow vaping while charging (called passthrough), but not all. Removable battery vape mods allow the user to swap out drained batteries for fresh, fully-charged batteries. Both types are popular and available.

    A box mod with removable batteries may incorporate one to four rechargeable Li-Ion batteries, although one or two is most common.

    Typically, box mods have a rectangular shape, but this varies from regular boxes with sharp, straight angles to more ergonomic and aesthetic curved designs.

    Box Mods can use any of various regulating chips/boards that vary from providing simple safety protections to more sophisticated functions, such as variable wattage output and temperature control. The second type usually has a display screen that shows information about the settings and functions. Some box mods are designed and made with no chips at all, and occasionally even no soldered wiring, in which case they’re called “mechanical mods.”

    Vape mods (or vapor mods) are made in many sizes and every conceivable design. Materials include plastic, metal, and wood. Colors range from basic black or silver through the entire spectrum, and from simple monochromatic adornment to beautiful works of art.

    Most vaping hardware qualifies as “disposable,” and this includes box mods. Few are designed and manufactured to last forever in actual use. Lifespan varies wildly, from a couple months before they break or stop working to many years of faithful, dependable service.

    Which vape mod is right for you?


    Choosing a the best vape mod for you requires answering numerous questions about your preferences:

    • How much power do I want?
    • How large (or small) do I want my box mod to be?
    • How important to me are the ergonomics and aesthetics of my box mod?
    • How much sophisticated chip technology do I want?
    • How long can I vape between battery recharges?
    • How much am I willing to spend?

    There’s likely to be a box mod available in the marketplace for every combination of responses, so finding the best vape mod to fit your preferences shouldn’t be too difficult

    What are temperature-controlled vape mods?


    Vaping began in 2005 by using fixed voltage power sources exclusively. Around 2011, variable voltage was developed, followed quickly by variable power (wattage).

    Temperature control followed on the heels of those earlier improvements. Temp control (or TC) is the most recent technological development in vaping chips that emerged initially in 2014 and has quickly become an industry standard feature of most mods.

    Atomizers operate by vaporizing e-liquid with a metal heating element, usually in the form of coiled alloy wire. E-liquid is supplied (or wicked) to the atomizer by silica, cotton, or other fibrous cellulose material that goes through or around the coil or coils. If the wick is not sufficiently saturated with e-liquid, the result is “dry hits”. A dry hit not only produces no vapor, but tastes terrible, with either a nasty burnt wick taste or an even more unpleasant hot metallic aftertaste.

    Also, unregulated e-cig mods perform less efficiently as the battery/batteries drain. What starts out as a great-tasting full vape with fresh batteries diminishes over time, providing less flavor and vapor.

    Temperature control addresses both those problems by regulating and controlling the amount of power supplied to the coil. When the coil is not “bathed” sufficiently in e-liquid, it quickly overheats, producing dry hits. Temp control technology doesn’t actually sense temperature — instead, it monitors the changing resistance of the coil, which corresponds to predictable changes in temperature. When the coil begins to overheat, the temp control chip instantly reduces the power, thus preventing the wick from burning and minimizing or eliminating dry hits. If the coil becomes totally dry, power will be completely cut off.

    In addition, temp control provides a consistent vape throughout the power range of the battery drain.


    Most temp control vape mods currently require atomizers to be outfitted with coils using one of three specific wire types — nickel, titanium, or stainless steel. As the technology is improved and refined, other wire types such as kanthal, nichrome, or even tungsten, may be usable with TC some day.

    TC lets the vaper specify the maximum temperature allowed before temp protection (i.e., instant voltage limitation) activates. The range is typically from 100-300° Celsius, or 300-600° Fahrenheit. As much power is applied as necessary to maintain the set temperature, but no more.

    Temp control has not been universally adopted by vapers. Those who use TC tend to swear by it, but many other vapers use TC only sporadically or not at all. Since most mods now contain regulating chips, however, and since it’s no more expensive for manufacturers to include temp control technology in their chips, TC has largely taken over the vape mod marketplace.

    The Vaping360 team is a diverse group of experienced vaping contributors. We strive to bring you the finest content on all things vaping. Don’t forget to sign up to our newsletter and make sure to follow us on Facebook and Instagram for more!


    1. Now this is a very worthwhile piece to read , i find the overwhelming majority of reviewers out there these days to be a major disappointment but you did a very good job on this one.


      • Hey, you got to give credit where credit’s due , your reviews are where i have directed people to go when asked for good info on mods and other gear as a matter of fact .

        Love the way you lay it all out as well , very easy to navigate and follow along.

        Keep up the great work my friend.

        • Appreciate you spreading the word! Lots to come over the next few months. We have got some other reviewers on board to review more gear and we will be focusing on making the site quicker and nicer!

    2. @akendell:disqus Have you tried the new 200W snow wolf or the IPV3 LI with the 200w firmware upgrade yet?

          • If by kbox mini you are referring to the Kanger Subox, then yes I would say it is a decent little box mod that will fire up to 50W! Also check out the Innokin Disrupter as that is also a good 50W box. Need to add that one to this list!

    3. For me, Sigelei 75W Box Mod with Temperature Control is amazing box mod,i’m planning to buy one.Thanks for your review,very useful.

    4. Very nice round up. I think your list sums it all up as far as mods go. You have listed a device for every type of vapor out there. Myself, having gone through alot of mods…..MVP 2, 20W….iStick 30W, 50W…Sigelei 30W mini…Smok XPro M80 Plus. I have finally settled on a simple but powerful mod. The Sigelei 150W in Royal Blue. I found out that I wanted something with power, replaceable batteries, and a great product. I did read your review of the Sigelei 150W and liked it. You guys are good. Keep up the excellent work.

    5. Mine Modz 120 Watt Raptor, cleanest work you will find, a beast of a box around 135.00. A plus is that you can deal with the maker directly instead of having a hundred dollar paper weight after the chinese junk breaks. I have several of those planned obsolescence devices on my desk.

          • Hi DevilsXcry,
            As Alex mentioned, we had a massive site re-design recently which took two months to complete, so things were quite quiet during that time. We are tying to get more reviewers in place to make sure we cover more products, but unfortunately due to the market moving so quickly it is very hard to cover even a fraction of the new products coming out and some things just get missed. We are doing our best, so bare with us! Over the last month we have published around 20 reviews, which I don’t think is too shabby. We have to make sure we appeal to all types of vapers with our reviews, so that means providing a mix of products and not just box mods.

            Best regards,

      • I have the Snow Wolf 200w TC. This thing is so fun I can hardly put it down for long. I have the limited edition with the gun metal finish. It also has the updated chip on this model. The first gen snow wolf 200 had some issues that were addressed with the new version. The only cons so far are
        Fingerprints get on the mod too easily constantly wiping them away just to leave more in a few seconds.
        Changes to pulse mode when you turn up the mod sometimes over 150 watts (though I never need that kind of burn anyway even on my dripper) Depending on what your build is also. I’d have to be insane to try it out of a subtank with that kind of wattage

      • I love love love the snow wolf 200w! The only downside is it absolutely CANNOT take a fall! But it is amazing overall!

        • Mone worked amazinggg, I loved it knocked it of my laundry basket like a foot and a half to the ground… it worked after and then I went to bed and now it won’t turn on. Any way to go about fixing it?

          • I dropped my snow wolf and had a similar problem.
            I found with mine the batteries had bumped the contacts, squashing them slightly, so they would no longer touch correctly. A little, light pull on the contacts to bend them back out slightly, fixed the contact issues and it’s been working fine ever since.
            May not be the problem you are having but worth a try.

      • The snow wolf is lame imo its not actually 200w just 150w DC then it will pulse to simulate the wattage intended over that. Its so heavy too, I felt like my jeans were falling down with it in my pocket xD.

        Get a cuboid they are miles better imo, it will actually go to 200w if your battery and coil setup allow.

          • That depends on your coil ohms and batteries actually, you can’t just say no duel 18650 would because if you have your ohms low enough you can get the watts high enough but it would increase amp draw so batteries would have to be high quality.
            So theoretically you could but most regulated box mods have a minimum ohm safety feature. In reality you could do it on an unregulated boxmod but would put undue strain on the batteries unless you are using new 35 amp cells

            • I use the Joy tech Cuboid, TFV4 octuplet coil, with dual LG 18650’s and it’s fantastic. The only problem is that the Cuboid has a 25amp capacitor built in to the firmware, so you can’t get an actual 200w with it… Unless someone else has a way, or hopefully joytech addresses this issue. But none the less, I use my setup at 100w, with the coil at 0.19ohms, and I get pretty hearty cloud and flavor.

    6. Thanks for the great info. I have a question I can’t seem to get an answer to. I have the MVP 3.0 and my ohm just flash. What is up with that? Is something wrong with my box?

      • Hi Shellely. I am no too sure tbh, as I haven’t seen that happen before. Does the mod still work or does it just flash and not work? Maybe its not making the proper connection with the tank. Try another and see if that is doing the same thing.

    7. Obviously, just as with sub-ohm tanks, devices that can power sub-ohm tanks are coming out at a furious pace…Volcano’s Lavatube 3 and LavaBox…Johnson Creeks Vea Elite (which is actually the USA version of the S-Body Mini Torch)…the S-Body Macro by VaporShark and DNA200 (also made by S-Body I believe, who also were the makers of VaporSharks DNA/rDNA mods)…the IPV D2 from Pioneer4You…the Esquare/ Epetite and Tan DNA40 devices by Lost Vape…Snow Wolf v1.5 Limited Edition…the Troca/Alesia and Suprabox from JWell which is beginning it’s inroad to the USA market (btw, don’t forget to check out their sub-ohm coil tanks, the Strada and the Duplx)…and on and on…

    8. Can someone help me. I just received my ipv4 S and I’m using it with my kanger subtank mini. I cannot fire up and constantly receive low resistance. Sometimes even the message short. Batteries are legit and fully charged, hit + and – keys to try and set but can’t really get it past. 006. Cleaned the 510 connection as well. Is it the tank itself because I have the Smok TFV4 coming.

      • Have you tried a new coil on the subtank? Could be that the wire inside the coil. Is the tank clean? Could be that liquid got to the connector and that is why you are getting a short.

      • I guess it is one of those products you love or hate. I have heard good things and bad things about it but personally we have had zero issues with the 10/20/30W iSticks. They are very affordable and easy to use. We did take out the 50W device due to production issues but Eleaf have fixed the main issues with the last batches.

    9. So I’m lookin for a box mod with variable voltage/wattage for my wife. I have the ipv4 and she loves it but she thinks its to ugly.. She wants a girly one. Like pink or purple. Anyone know of one?? Thanks guys!

    10. Two mods come to mind that you missed. Snow Wolf 200W and iStick TC40W. I really think you should check out the iStick TC40W as its a great TC mod for its price point. Its great for an intro TC device if anything. I really hope to see it on your list soon. Seems like you guys neglected it for some reason. To be honest, I had it and ran my Herakles in TC mode and it was amazing! Flavor and clouds were outstanding. I moved up to my evic vt for battery life and my iStick TC40W was vaped forward to a friend.

      • Hi Nick. Yeap we need to update the article, as there are just so many new mods right now. Hard to keep up, but I will definitely consider the two you mention, as they both seem like great mods. Appreciate your recommendations!

    11. I am trying to decide which mod to get!
      I want to quit smoking! But I haven’t found the right set up (juice included) to satisfy my craving… So someone Please Help!!!
      I am trying to decide between several..
      1.) Kangertech Subox Mini
      2.) Kangertech Subox Nano
      3.) eLeaf iStick 50w
      4.) eVic VTC Mini by JoyeTech
      Or if someone has a better recommendation, please let me know!
      Thank you in Advance!!!

      • Hi Amanda. I wouldn’t get the iStick 50W, as it had some autofiring issues. Any of the other three are solid choices. The Subox Mini has a larger tank than the Nano, but the Nano is slightly sleeker in terms of the design of the box itself. The Evic Mini looks great as well and you can’t go wrong with any of those three you mentioned.

        • What autofiring issues have you heard about, and how common is it? I have the iStick 50w & love it. Haven’t had any trouble at all, and I’ve been using it daily for a few months. But if there are issues I should look out for, I’d like to know.

      • Amanda, I started 2 years ago with the Innokin MVP 20, and still using it! I felt really lucky that this was what I was sold to start with. The benefits of Innokins are they have powerful built in batteries, that charge with a mini usb port. You can also charge your cell phone with it. It fits almost all clearomizers,and tanks. Variable volts/ watts,on off button. Personally I think this is an excellent way to get started. I quit smoking tobacco the same week I began vaping, have never looked back! I’m just now upgrading my experience to the MVP 30 pro, so I can finally try a sub ohm tank.

    12. ” check out our article on “What is a box mod?””…putting that without putting the link isn’t very helpful. Still don’t exactly what one is and don’t feel like searching this site until I find the article.

      • Apologies Christopher. We were going to write the article straight after, but haven’t got around to it yet as we have just been so busy with reviews and other stuff. We should have an article up in the next month or so that will discuss all the types of vaping devices on the market and their pros and cons etc.

    13. I have a question guys I have a subtank mini kanger starter kit and I want to buy a SMOK TFV4 subtank but i dont know if it will fit on my kanger minibox

    14. I have a question guys I have a subtank mini kanger starter kit and I want to buy a SMOK TFV4 subtank but i dont know if it will fit on my kanger minibox

    15. I have the IPV4S and to me it is all I could need. Fingerprints do get on the screen but that’s not a big deal to me. I love it so much I can never put it down. I always have my dripper on it (a mutation x v2) and I can go to 120 with it but I always keep it at around 65 I found is the sweet spot with my coils. To me it could be a little better but im not one to complain I love to see people recognizing it thank you.

    16. Beginner- MVP20 and Sigelei 30
      Intermediate- MVP Pro kit and IPV 2 mini 70 watt
      Advanced Non Tc- Sigelei 150
      TC High End- SX Mini, Sig 150 TC, IPV3LI and IPV4S, Snow Wolf
      VOX, SMOK , EVIC VT either overpriced (VOX) or JUNK.

    17. Hey guys. I’m looking to do an upgrade. I have the iStick TC40W with an Atlantis V2. The battery life sucks and I’m just not getting quite the flavor out of the combo that I was told I would get. I’m looking for something a lot better, keeping short of rebuilding coils and dripping. Any suggestions would be greatly appreciated.

        • Linda meant the VIP Cig-a-likes and eGo devices.

          Linda: Those devices are really not that effective or publicly obsessed over in comparison to the devices aimed at more experienced users 🙂

          • Ah, okay. Thanks for the heads up, I guess cig-a-likes are still used for smokers picking up on vaping (seeming as you can find them in nearly every shop). To be honest, I think they should be picking up an eGo or some sort of regulated mod to start off with. The vapor, flavor and experience is just that much more than what you get with the cig-a-likes. Thanks Vaperex!

            • Yeah definitely I think cig-a-likes and eGos still make a up a lot of the market due to their wide availability.

              Not a bad thing as the worst they will do is reduce daily cigarette consumption and hopefully tickle new vapers curiosity to the more advanced and effective stuff 🙂

              Anyways, great post – ended up with an Evic Mini!

            • That is very true. Mind you I have a sneaky suspicion that some of the people buying these cig-a-likes expect more of them, thus are disappointed and go back to analogs. I guess you have to want to quit to like vaping. If not you are going to be one of the vape-haters. Thanks for the kind words, good choice! How is it Evic VTC Mini running for you?

            • Oh damn, that little bitch is running dayme gyyyyd!
              – I am running velocity rda, with fused clapton coil, and it is my fav regulated mod, to ma velocity! 😀

    18. For beginners, the k anger tech subox nano is nice, it doesn’t come with a battery so be prepared for that, but 70 for a sub ohm box mod that allows temp control all the way from 0.1-50 in .1 increments really isn’t bad. It’s my first sub ohm piece I’ve owned and I’m learning on it about temps, taste, clouds and coils on it. I always used to assume a higher temp was better, now with this piece I’m finding out more of the intricacies that different temps play on your vaping experience. Personally I use Charlies chalk dust dream cream and Cut wood bird brains (fruity pebbles flavor) on my box, box vape extremely nicely and the flavors are amazing

    19. I’m thinking very hard about the eifel T1. But I’m running on a very low vape budget and can’t afford to make a poor decision and regret it in a month.
      If I get it I’ll be running the T1 with a herakles tank and a Delta 2 I’ve just started building coils for.

      Is there another high wattage box I should be considering for 50$(ish) as opposed to the T1?

    20. Based on the reviews im thinking about getting a Koopor Plus with a Crown Uwell tank and i would like to know if this would be a decent combo. I was also wondering if you have done a review or tried Twelve Vapor?

        • Also try the Wismec RX200. Its a 200W device with temp control takes 3 18650 batteries. it might look like a big mod but it fits in the hand perfect. i have small hands and it feels good. And the best part about this device is that its only round $50.

    21. How about the rx200 from jaybo 45 bucks ft xmas code beats all!!!!!!!!!!!! Got a rta for you all to check out vctm from vaporz clouds builders dream with a 25mm and 30 mm decks .25 and .30mm holes in velocity style deck. Marry christmas to u and you’re family

    22. I’ve got a decent collection of these tanks and a few mods as well now. Been vaping since June and love the reviews on this site the way they’re done. Love that you test most coils and let everyone know where the flavor sweet spot is.

      (Most of)My collection: (FAVE)Smok X Cube 2(Black), Snow Wolf 200W, Sigelei 75W, Cloupor Mini Plus(White), (FAVE)TFV4 Mini,(Bl.), (FAVE)Crown Tank(Bl. & SS), TFV4(SS), iSub G, Zephyrus(plan to get Bl. V2!), UD Bellus, Atlantis V1&2, Herakles, Arctic, Phantom Micro, Hatrick Tank, Mutation X V4 & XS Mini, Atty3, Doge XV2, Tobeco Zorro & Vector, PSO Swirlfish, & HellBoy(clone). Also have tons of Wire, cotton, and TONSof tank coils lol. Along with TONS n TONS of eliquid! Thats just 6 months worth on small budget, would have lot more if I made more $$…

    23. You should also try out the hexohm v2.1 it’s a beast and goes well with the smok tfv4 minI and the sextuplet or quad coil

        • i just got the RX200 today and a wotofo rda and im also using my kanger subtank mini on it and its the best vape i ever had. im really surprised the RX200 isnt on here. Its a 200W mod with temp control and its like $50 in my opinion its a very great price for it.

    24. Also the kangertech Kbox 200 wasn’t on the list? Only mod that is TC on NiCr. Have not tried it yet, but how about a review?

    25. The best mods for vapes, boxes, and ecigs are at VaporFi! Head over to Save $10 on VaporFi (click) and upon checkout, an instant $10 discount will be applied to your purchase as a thank you for reading this Vaping360 post! The $10 discount is good on ANY PRODUCT on the VaporFi website! For example, if you buy one of our 30,000 juice flavors for $10, it is yours for FREE if you buy using this exclusive discount.Many products are only $10 which means it’s yours for 100% free! What do you have to lose?

    26. Hi
      I own Apollo Reliant 60 W TC and Phazer sub tank.I must admit sub tanks is not for me. I’m vaping almost 4 years now, and after I tried this combination above, I was quite disappointed.
      Started with severe cough, even worse than I smoked long time ago.
      Anw, I want go back to Aspire Nautilus Mini tank.
      My question is (maybe stupid):
      -can I use Apollo Reliant 60 W TC and if yes, how? Which settings?
      I know, Apollo uses 1,8 Ohm BVC coils but I can’t adjust Ohm..I can adjust temp. and wat’s..

      Greetings from Sweden.

      • Hi Max. Yes unfortunately “sub ohm vaping” isn’t for everyone. At least you now know it isn’t for you! If you are vaping the Nautilus on the 1.8 ohm coil, take a look at the wattage recommendation on the coil packs and use the Reliant in wattage mode at the suggested recommended wattage. If there are no recommendations start at around 5W and gradually go up to whatever is enjoyable for you (I’d guess around 10W is good, maybe slightly higher).

        • HI Chris
          Thank you for your fast response. Actually, one of your article here where you explaining everything about sub ohm vaping, helped me find a reason for my cough. I guess, I was in that mood where I don’t want admit that sub tanks isn’t for me at all.
          Thx again.

    27. Looking for a less conspicuous, single battery mod in the 75-90w range for work and car. Options look like Evic mini, IPV D3, Sigelei Spark, Wismec Presa, etc. Any favorites among these? The

      • I am currently using the D3 mod topped with an Aspire Cleito tank. The whole setup is only about the height of a can of beer but it throws clouds like nobody’s business. The battery life has been much better than anticipated. Even when I’m chain vaping, usually a fresh battery will last all day.

      • Eleaf iStick Pico is pretty good, only 75W though. It’s tiny, only a little bit bigger than the Artery Nugget, which I also have, but has a replaceable 18650 battery, which is great when many mini/micro mods have none replaceable batteries. Granted I’ve only had it a day and only used it with Aspire Nautilus and K1 tanks, looking to buy a sub-ohm RBA soon.

    28. The snow wolf 1.5 is one of my favorite boxes and I own DNA 200s vapor flask ect.

      The snow wolf packs a punch .

    29. When the SX Mini Q drops, definitely add it to the “High End” selection of the list. New Yihi chipset (SX450) & finally a series box with no extension tube from them!

    30. Please do a review on the twisted messes box mod. I’m lovin’ your site guys! More power! Thanks!

    31. Awesome compilation. Definitely very useful for a first timer. What’s your opinion on the following? Please note that I am a noob and have NO experience. I’d prefer to go for a starter kit at the moment for this reason, buy the juice and hit the ground running.

      1. Smok Micro One Starter Kit

      2. Joyetech Cuboid Mini 80W TC Starter Kit

      3. Innokin Cool fire4 Plus

      4. Kanger Topbox Mini Starter Kit

      5. Joyetech eVic VTC Mini (with CUBIS or Tron?)

      • Thanks Nishant! Personally I do not like the SMOK Micro One kit.

        Here are my favorites:

        1. Innokin Coolfire IV Plus Kit
        2. Joyetech eVic VTC Mini + Cubis
        3. Joyetech Cuboid Mini 80W TC

        I personally do not like the others mentioned.

    32. I have a reuleaux rx200 using it with a smok tfv4 and 3 samsung 18650 batteries but the problem is that they get empty pretty fast is that normal?

    33. Hey so I just purchased the crown tank I love it ! But o have the beginners Eleaf 50w so I can’t really vape as high as I want to with all the coils they offer. Any suggestions of a great box mod for a great value. Thanks !!

    Comments are closed.