Best RDAs


Welcome to the Vaping360 best RDA list.

Whether you are looking for quality RDAs suitable for beginners, RDAs for flavor, or for clouds and flavor, our goal with this list is to help you navigate that terrain with products that run the gamut in functions, building options and user-friendliness. And of course, we will have our choice for best cheap RDA!

It’s always fun to find out what new RDAs are coming out, but it’s also nice to know which ones are already tried and tested.

If you want a little primer course on what an RDA is and what an RDA vape is about, see our article here: An Introduction to RDAs and Dripping, or read further down on the page. Our Best RDA list will be for RDAs that are accessible, of reliable performance and quality manufacturing. Whether inexpensive or high-end, we will only vouch for quality RDAs.

So please enjoy our list for the Best RDAs. Vape on! Read on.

Best RDAs

Save 15%
  • Easy to build
  • Single or dual coil options
  • Includes squonk pin
  • Side-mounted flat head screws
  • 5-mm deep juice well
  • Gold-plated posts
  • Affordable
  • Smooth top-side airflow
  • Cons
  • Leads may need to be pre-measured when building
  • Specifications

    • Brand: Hellvape
    • Model: Dead Rabbit
    • Type: rebuildable dripping atomizer
    • Material: resin / stainless steel
    • Thread: 510
    • Product weight: 0.0400 kg
    • Package weight: 0.0900 kg
    • Product size (L x W x H): 3.80 x 2.40 x 2.40 cm / 1.5 x 0.94 x 0.94 inches
    • Package size (L x W x H): 11.30 x 7.80 x 3.60 cm / 4.45 x 3.07 x 1.42 inches

    The Dead Rabbit is a 24 mm RDA by Hellvape and Vaping Heathen. It features a top terminal, four-post build deck with gold-plated posts. With a 5 mm deep juice well, the Dead Rabbit’s posts are trapped by hex or flat head screws which are side mounted. Airflow is designed for big flavor while reducing leakage.

    With the device you receive two 810 drip tips, one that is made of delrin and the other one resin. It even comes with a 510 drip tip adapter and a gold-plated bottom feed pin. The Dead Rabbit RDA can be used in both single or dual coil mode, whether you are dripping or squonking it. With stunning performance, the Dead Rabbit is one of our favorites this year.

  • Post-clamp system
  • Two posts
  • Easy build
  • Room for big coils
  • Cloud-comp ready
  • Versatile airflow
  • Open & even draw
  • Clean machining
  • Deep juice-well
  • Hybrid compatible
  • Cons
  • Best suited for exotic coils
  • Specifications

    • 24 mm In diameter
    • Half-Inch drip-tip
    • Standard 510 connection
    • Copper 510 pin
    • Gold-plated bridge posts
    • Gold-plated clamps
    • Hybrid safe
    • PEEK insulator
    • Positive & negative bridges

    The Goon is an RDA that feels like it should be $100+, and it is the RDA coil builders have been waiting for. With a two-terminal clamp-style build deck and a 24 mm diameter, this atomizer will take any build you throw at it.  On top of that, the plates and terminals are all gold-plated which significantly increases conductivity.

    The quality of the Goon far exceeds the price, it stands up to–and crushes many–of the $100+ atomizers on the market with its fantastic build quality.  The airflow is very versatile and allows for a wide-range of draws.  Due to the size of the chamber, this atomizer is better suited for high power builds and exotic wire builds, hence the intermediate to advanced recommendation (though beginners could easily use this RDA, it’s best suited for those with experience in building).

    If you’re looking for an atomizer that allows a lot of creative freedom for builds, look no further, the Goon is the atomizer for you.  The Goon comes in SS, brass, copper and black.  The Goon is easily one of our top picks for build quality, versatility, performance, and price!

  • Squonk pin included
  • Two drip-tip options
  • Well-machined
  • Goon-style drip tip compatible
  • Easy to build
  • Quiet
  • Smooth airflow
  • Gold plated 510
  • Deep juice wells
  • Knurled thumb screws
  • Cons
  • Drip tip is a tad bit loose
  • Flathead screws not very deep
  • No extra clamps included
  • Specifications

    • 24 mm Diameter
    • Two-post build deck
    • Clamp snag system
    • Knurled thumb screws
    • Phillips head
    • Convenient and secure assembly
    • 2.5 mm x 3 mm slot space
    • 24K gold-plated deck
    • PEEK insulator
    • 20 mm diameter deck
    • 6 mm deep juice well
    • Adjustable dual airslots
    • 12 mm x 2 mm
    • Adjustable via top cap
    • Rounded internal top cap
    • Smooth vapor delivery
    • 24K gold-plated 510 contact
    • 304 stainless steel
    • 810 drip tip fitment
    • ULTEM drip tip (10 mm bore)
    • Delrin drip tip (10 mm bore)
    • CNC engraved

    The Augvape Druga is a unique 24 mm RDA that features a special clamp snag system that can be tightened down with your fingers, or a flathead screwdriver. It has a fully 24 K gold-plated deck for conductivity as well as flavor. Not only does the deck look nice, but it’s easy to build on.

    This atty is a simple and sleek alternative to the Goon. The flavor is on point, and it will even fit your favorite Goon drip tips. The juice well is 6 mm deep, so it holds a ton of e-liquid and the airflow slots are 12 x 2 mm, adjusted by the top cap. Last but not least, this device comes with 2 x 10 mm drip tips made of ULTEM and delrin. Goon lovers are going to love the Druga!

  • Well machined
  • ULTEM ring protects against leakage
  • Accommodates large coil builds
  • Rounded top cap enhances the flavor
  • Easy to build
  • Includes two different top caps
  • 24 mm deck
  • 25 mm top caps
  • Gold-plated 510
  • Cons
  • Proprietary drip tip (fits original Recoil drip tip)
  • Not squonk-compatible
  • Specifications

    • 24 mm deck
    • 25 mm top caps
    • 304 Stainless steel
    • PVD coated (gold / black)
    • Gold-plated brass 510 pin
    • 2 x 3 mm airflow holes on cloud cap
    • 4 x 3mm airflow holes on secondary AFC cap
    • Ultum Insert to prevent leaking
    • Spare o-rings and hex screws
    • Peek insulators

    Grimm Green and OhmBoyOC are back with a new installment of the Recoil RDA. If you’re an overdripper, this one has your name written all over it. Featuring an ultem ring that goes around the deck, to prevent leakage due to overfilling. Your dry mod will thank you.

    Ideal for dual coilers who enjoy big beefy coil builds. Its stacked staggered post design is easy to build. Just like the original Recoil RDA, they’ve included two top caps. One of them is designed for clouds, the other for flavor. The Recoil Rebel implements a rounded top which translates into smooth, delicious vapor. If you liked the Recoil, you’re gonna love this one!

  • Good heat dissipation
  • Spacious build deck
  • 24K Gold plated copper 510
  • Great flavor
  • Deep juice well
  • Well machined
  • Accommodates any type of wire
  • Squonk pin included
  • Extra mouthpiece and goodies included
  • Cons
  • Airflow can whistle a little bit
  • Wicks differently than most RDA's
  • No 510 drip tip adapter
  • Specifications

    • 510 threading
    • Size: 24 mm
    • Finish: Stainless steel or matte black
    • Postless build deck for flavor and clouds
    • 4 mm lead inserts
    • 24K gold-plated deck
    • 24k gold plated copper pin

    The CSMNT by District F5VE has been called a “builder’s dream” because it’s 24 mm postless deck means more room for building. That means you can fit larger diameter coils in it’s beautiful fully 24 K gold plated deck, with huge 4 mm lead inserts. Huge clouds and flavor for days…

    The Cosmonaut also has a gold-plated 510 connection for extra conductivity and comes with two drip tip options in addition to a bag of other goodies. This RDA is easy to build wick, once you get the hang of it’s unique deck. The CSMNT wicks similar to the SOI Sub Zero RDA.

    It is no coincidence why this is one of the most sought after drippers to this day, even though it was actually released late 2016. District F5VE took every vaper into consideration to create an incredibly versatile dripper that caters to big builders, top cap drippers and flavor chasers alike!

    This RDA isn’t exactly cheap, but for the price, it’s worth every penny.

  • Excellent build quality
  • Gold plated deck and 510 pin
  • Intense flavor at low wattages due to reduced chamber
  • Versatile build deck
  • Squonk-compatible
  • Smooth airflow
  • Minimal moving parts
  • Cons
  • 810 Drip tip (not 510 compatible)
  • Drip tip collects condensation
  • Specifications

    • 24 mm diameter
    • Postless deck
    • Four terminals at base of deck
    • 2.5 mm each terminal
    • Side-mounted hex screws
    • 3 mm deep juice well
    • Double o-ring secured
    • 24 K gold-plated deck
    • PEEK insulator
    • Length extended airflow system
    • Dual adjustable side airflow
    • Airflow angled towards coils
    • 4.5 diameter each air hole
    • Single airflow capable
    • 8 mm bore 810 ULTEM drip tip
    • Bottom feed pin
    • 24K gold-plated 510 connection

    Now you can drip like a pro. The DPro by Coil Art is a 24 mm dripper with a 24 K gold-plated postless deck and 510 pin. Featuring a 3 mm deep juice well and an extended airflow system, the Coil Art DPro is more than capable of putting out big, tasty clouds of vapor.

    Other standout features include an 8 mm bore 810 ultem drip tip, peek insulation and an angled airflow system to create a flavorful vape even at lower wattages. Dual adjustable airflow with 4.5 mm in diameter air holes, side-mounted hex screws and even an option for the single coilers.

  • Great flavor when configured properly
  • Tubular side direct airflow prevents leakage
  • Can also be used as a standard dripper
  • Works great as a single/dual coil squonker
  • 810 drip tip compatible
  • Bottle barrel locks into place
  • Cons
  • Vapor may hit your face when purging
  • Specifications

    • 22 mm diameter
    • Deep juice well
    • Stainless steel construction
    • Pyrex glass reinforcement
    • Postless dual terminal design
    • PEEK-insulated positive terminal post
    • Negative terminal post
    • Single coil configurations
    • Side-mounted Kennedy-style airflow
    • Dual-slotted side air slots
    • Quad airflow tubes inside chamber
    • 14 mm wide delrin wide bore drip tip
    • 510 drip tip adapter

    A bottom fed, top airflow device, with excellent flavor production and clouds for days. It works just as good as in single coil mode as it does in dual coil mode. Smooth and abundant airflow. Tony, of The Vapor Trail channel on YouTube, collaborated with Vandy Vape to to help design it.

    The tubular side direct airflow system protects against leakage. When lined up properly, the flavor is up there with some of the best flavor-chasing attys. In squonk mode, the Vandy Vape Pulse’s unique design evenly juices your coils and works great as a regular, flavor chasing RDA.

  • Massive airflow
  • Innovative build deck
  • Excellent flavor
  • Squonk pin included
  • Comes with 3 drip tips
  • Solid build quality
  • Deep juice well
  • Affordable
  • Multiple color options
  • Cons
  • Stiff airflow adjustment
  • No extra hex screws included
  • Specifications

    • 24 mm diameter
    • 7 mm deep juice well
    • Superior 303 stainless steel construction
    • 24K gold-plated build deck
    • Unique two-post design - fixed screw clamp post design
    • Outer terminals - top-secured via slotted flathead screws
    • Inner terminals - top-secured via clamp mechanism
    • Parallelogram airslots on each side
    • Direct-to-coil chamber effect
    • 18 mm wide 810 resin widebore drip tip
    • 17.5 mm wide 810 ULTEM widebore drip tip
    • 16 mm wide delrin widebore driptip
    • 510 drip tip adapter
    • Squonk-ready 510 pin
    • Gold-plated 510 connection

    Want huge clouds and superb flavor? Meet the Bonza. Designed in collaboration with the Vaping Bogan, the popular Australian YouTuber. The Bonza RDA is 24 mm in diameter and features a deep 7 mm juice well. It comes in five different colors and include a bottom feed pin.

    The Bonza utilizes a side airflow system to prevent leakage. It won’t flood if you overdrip or oversquonk. The build deck is gold plated and can handle the biggest and most exotic of coils. The Bonza RDA includes a Delrin and ULTEM drip tip in addition to a 510 drip tip adapter.

    Save 10%
  • Stepped airflow system
  • Super easy to build
  • Includes squonk pin
  • Includes 2 drip tips
  • Awesome flavor
  • Good value for price
  • Cons
  • Top cap hard to take off
  • Specifications

    • Diameter: 24 mm
    • Standard 510 Pin (raised bottom feed pin included)
    • 510 drip tip adapter
    • 810 drip tip fitment
    • 9 mm bore acrylic drip rip
    • 10 mm bore ULTEM drip tip
    • Gold plated 510 contact
    • Stepped airflow design
    • 10 airholes per side fully close-able ``T`` shape
    • Four post build deck
    • Single terminal per post
    • Side mounted flathead screws
    • 3.5 mm each terminal
    • PEEK insulator

    The Drop RDA brings a lot to the table. Brian of The Vapor Chronicles made sure to put his name on an impressive device. It features a brilliant T-shaped stepped airflow system to dial in your exact setting. Its flavor is some of the best you can get on a rebuildable dripping atomizer.

    The four-post build deck makes it easier than ever to install coils. Simply drop your coils in, tighten up the screws and cut your leads. The way the posts are designed, you can clip your leads with ease. The Drop is 24 mm in diameter and comes complete with a 510 squonk pin.

  • Very affordable
  • Easy to build and wick
  • Leak resistant
  • Perfect for squonking
  • Low profile design
  • Excellent flavor
  • Cons
  • No dual coil option
  • Specifications

    • 22 mm diameter
    • Big deck for easy building
    • Unique adjustable airflow system
    • Bottom filling design with exchangeable squonk bottom pin
    • ULTEM heat resistant top cap
    • Compact design
    • 22 mm stainless steel design
    • Deep juice well

    Big things come in small packages. The Wasp Nano by Oumier low-profile RDA designed for single coils. It has a narrow deck, which contributes to its excellent flavor production. The Wasp is 22 mm in diameter and only 22.5 mm tall without the drip tip, yet still provides tons of airflow.

    For the price, you’re not going to find a better single coil RDA. It puts drippers that cost double or triple the price to shame. The Wasp Nano also works great as a squonking atomizer too. Now you can have an affordable squonk setup. Pair it with any of your favorite bottom fed devices.

  • Authentic MTL draw
  • Superb flavor
  • Precise airflow
  • Includes squonk pin
  • Easy to build
  • Affordable
  • Cons
  • No dual coil option
  • Can't drip through mouthpiece
  • Specifications

    • Size: 22 x 32.4 mm
    • Coil: single
    • Material: PMMA/stainless steel/Delrin
    • Thread: 510 threaded
    • 6-level side airflow system
    • Unique limitless screw airflow control
    • PMMA/Delrin material for anti-heat
    • BF pin adapter included
    • Easy single-coil building deck
    • Deep juice well

    If you’re a mouth to lunger, then you know how hard it is to find an affordable MTL dripper. Here it is! The Vapefly Galaxies is a fantastic option for vapers who want that tight, cigarette-style pull from their dripper. The Galaxies is a 22-mm RDA designed for flavor chasers and single coilers.

    The adjustable airflow system on the Galaxies RDA is precise. Dial in your perfect MTL setting, or open it wide open for a restrictive lung hit. The Galaxies can also be used in squonk mode with an included bottom feed pin. It’s an affordable and great-performing mouth to lung RDA.

    Introduction to RDAs

    Styles of RDAs

    There are three styles of rebuildable atomizers: RDAs (Rebuildable Dripping Atomizers), RTAs (Rebuildable Tank Atomizers) and Genesis atomizers. A recent new category of atomizer has been developed as well called an RDTA (Rebuildable Dripping Tank Atomizer). RDTAs combine an RDA type deck design with a tank that drips e liquid or acts as a large well. Rebuildable atomizers use a coil, or coils, made by the user by wrapping wire around a small rod, 2-4 mm in diameter. Common wire types used are Kanthal (FeCrAl), titanium (Ti Gr1), nickel (Ni200) and stainless steel (SS). Kanthal can be used on all mods in variable wattage (VW) mode due to its stable resistance when heated. However, titanium and nickel must be used in temperature control (TC) mode due to their varying resistances when heated. Stainless Steel varies only slightly when heated so may be used in both VW or TC modes. Usually wicks for coils in RDAs are made from cotton or rayon.

    RDA vape explained

    An RDA has a building deck where the user places the coils at the bottom of the atomizer. While an RTA, RDTA or genny have a tank, RDAs have a well to hold e liquid just below the build deck, and the wick tails are placed into the well to transport the juice to the coil(s). Generally the well does not have as much capacity as a tank style atomizer and the vaper must add more e liquid often. Unlike RTAs or sub ohm tanks, an RDA does not have a chimney section. Instead a top cap sits on the build deck and vapor rises up to the drip tip. Airflow may be fed to the coils from the bottom, sides or top, or a combination of these. Typically, the user can adjust the airflow to suit his/her vaping style.

    Different types of RDAs

    RDAs come in a variety of sizes and styles. They range in size from a diminutive 14 mm in diameter up to a whopping 46 mm. The build deck may allow for one up to 8 coils, though most are single or dual coil designed. Many RDAs work well for both horizontal or vertical coils. Airflow may be suitable for mouth to lung (MTL) or direct to lung (DTL) vaping styles. They are available in a variety of metal types from stainless steel to brass or copper, and some offer several color choices.

    RDAs may come with an optional hollow positive pin to allow their use on special bottom feeding mods called squonkers. A squonk mod has a plastic bottle for e liquid that a vaper squeezes to feed juice to the atomizer. Although they have always been popular to alleviate the constant dripping of juice, a huge number of squonkers have to come to market recently by several manufacturers.

    Cloud RDAs vs. flavor RDAs

    Most vapers categorize RDAs as being primarily for clouds or flavor. Cloud chasing RDAs have room for coils of heavy mass and large diameter like Clapton, Alien and other fancy, creative wire designs. Cloud RDAs also have huge airflow to generate immense, thick clouds of vapor, and appeal to direct to lung (DTL) vapers. Some users even enter their RDAs in contests to determine who can create the largest, thickest vape cloud. On the other hand, a flavor RDA tends to have less airflow, and is suitable for the mouth to lung (MTL) vaping style. A flavor RDA will hold only a single or dual coil design, and tend to be 22 mm in diameter or less. As expected, the primary objective is excellent flavor though many create a decent cloud of vapor as well. Of course, many RDAs create both fantastic flavor and respectable clouds.

    Advantages of RDAs

    Many vapers prize their RDAs for their exemplary flavor, and feel they excel in this category over other types of atomizers. Certainly, they are the easiest style of atomizer to wick. A quick rinse off much fewer parts than tank style atomizers, and it is ready for re-wicking. RDAs do not have wick channels, so they do not require the sometimes delicate balancing of wick tails between flooding and dry hits like an RTA does. Nothing beats an RDA for trying new e-liquids. A few drops of juice lets a vaper know whether that new bottle of e-liquid will stay or be passed on to a friend (or enemy). Additionally, RDAs allow for trying several e-juice quickly.

    For those who do not wish to purchase a squonking mod, but want more juice capacity than the typical RDA, many RDTAs may be the ticket. They essentially provide an RDA tank. With a dripper style build deck and top cap they offer the experience of building and vaping an RDA, yet have the advantage of a very large well in the form of a tank beneath the deck. Wicking is similar to an RDA but with longer tails immersed into the tank section.

    The Vaping360 team is a diverse group of experienced vaping contributors. We strive to bring you the finest content on all things vaping. Don’t forget to sign up to our newsletter and make sure to follow us on Facebook and Instagram for more!


    1. I have a kbox box nano. I wondered if its possible to put a simple rda on it to begin my transition. Im thinking 5 wrap single coil to vape at 40 watts. What would work woth this device?

      • Well, technically anything would, but for 40 watts and a single coil . . . hmmm . . . what is your price range? The updates are coming this week. We’ll put up a few more.

      • I started with a Kbox mini and a Wotofo Freakshow. Ran single 6 wrap, 24g, Kanthal at .45 ohm. Worked like a beast at 35-40.

      • At the time of posting this, most places were out of stock of the Goon. As said in the intro: “We will be updating this page soon, and when necessary. This is just the beginning.”

        Thanks for the comment.


    2. Hey, The Sapor by Wotofo, because they have worst customer service ever. I called them because I was having trouble with their website, and they don’t even know how to operate their own website and plus the attitude they showed me was worst ever. I don’t understand why their customer service exist at all.

      • Sorry to hear you had such an experience.

        How do you feel about the The Sapor?

        Thanks for the comment, even though I wish your situation was differernt,

      • Why is it that a majority of Americans think that just because they have purchased a product from a company, said company then has to kiss their ass?
        You are paying for their product not for them to be nice to you.

        Little life lesson the poor schmuck sitting on the phone listening to you bitch and moan was in all likelihood not the same person the company paid to create their website hence their lack of knowledge.

        The company’s customer service is for returns and product related issues. Its not their job to teach you how to use the internet. Why put down a good product because you are unhappy because the mean person on the phone didn’t read you a bedtime story. Jeez get a grip.

        • I didnt ask to kiss my ass. At least show some respect to a person who is showing them a respect. What I am concerned about is that how some people are so negative like you. It is their business, they should be on top of it, but I understand that they might not be able to do something, but the attitude come with it is not the best to be on a blog telling people that it is the best. The product might be really good, but the company is not. See, I dont expect them to teach me anything, but they don’t have to give me the attitude. I am kinda curious, are the person that I talked to? because you sure sound like her.

          • Firstly, how the hell are you showing them respect by bashing them in the comment section because they didn’t hold your hand while you were on their website ?

            Secondly, who are you to say the blogger is not entitled to their opinion that the Sappor is his favorite. It’s his opinion. If you want to get your opinion out there go write your own rda blog.

            Thirdly, get a grip, if you phone a company to Bitch and moan like a child 9/10 they will tell you where to go or just hang up on you. It’s a fact of life that the poor person on the other end of the phone likely doesn’t get paid enough to deal with idiots like you. They are not going to kiss your ass. Get over it.

            • Someone has a stick up their oversized ass… From what I can glean from Leo’s comment, Wotofo’s website was the problem. He didn’t have a problem navigating it at all, as the website was probably either down or not working correctly. You don’t need to attack him and further more, how would you even know he’s American? People like you should get a glass stomach because your head is crammed so far up your own anus that you’re blindly firing off your mouth. Did you forget that America is a combination of many races? There’s no such ethnicity as “American”. Go read a book that doesn’t have pictures in it, moron. You might actually learn something so you can stop running that foul trap of yours. It’s people like you that give vapers a bad name.

            • You are a Moron of Colossal proportions.

              Go and look up the word Nationality.
              People who were born or have citizenship in America are American regardless of their race. The only person who invoked race is you. Idiot.

              I make the valid assumption that the OP is American because of the self-important and entitled attitude of the post. As the whole world and even a majority of Americans know America is home to some of the most self-important and entitled people on the entire planet. That’s not to say that all Americans act this way of course, some of the worlds brightest and best also hail from America.

              ”From what I can glean from Leo’s comment” which is obviously not a
              great deal as it clearly states ”I was having trouble with their
              website” not the website was broken or down, his wording suggests that
              it was in fact him at fault and not the website itself. Alot can be ”gleaned” from the wording people use to describe things.

              The fact that the OP said the Sappor shouldn’t be on the list because of their experience with the company shows monumental sense of self importance. Even though later they state that they have never even used the device. Lets also bare in mind that this is a blog with the writers opinions and reviews of the products.
              The fact this person has the gall to expect the writer to change their review (/personal opinion) on a product that they have not even tried out themself at all is astonishing to me.

              Also for the record it is Vapers like me, who use their brain, don’t think that everyone owes them something, don’t blindly follow trends and what we are told by the media are the ones who are saving Vaping. Standing on the front lines to protest crippling legislation that could destroy Vaping as we know it.

              Let me ask you are you involved in Vape Advocacy?
              Am I likely to see you at rallies and protests next to me?
              I highly doubt it.

            • To be fair, I would bet there are more entitled people in Qatar. I assume it’s because they are all so disgustingly rich that they just lost the ability to give away their fucks.

            • Zenious, why the bitterness? Was your family thrown out of the USA for being undesireables? You make an assumption that the poster is American because of his (in your words) “self-important and entitled attitude”. Yet your own words show you to be nothing more than a pompous douche. Please type some more posts so I can laugh at you some more.

            • You are a stupid fucking prick. Go eat shit and die you worthless, asshole. Hopefully, your hatred, attitude, and negativity will effect your health and you’ll die early of a heart attack or be hit by a truck, and the world will be a lot better off of a hateful asshole like yourself.

            • His expectations are not unreasonable, the merits and characteristics of a successful company. A customer only wants to be appreciated, respected, and informed. Nothing wrong with wanting excellent service. That’s why it’s called “customer service.” Synonyms of the word service: “waiting on, helping, assisting, servicing, attending, laboring, kindness, favor.” That being said, as far service is concerned: commitment to customers, respect, positive attitude, competence, and the ability to form the customer of all aspects of service you offer can eventually make or break a company. I’ve seen so many businesses fail because they lacked the ability to offer the above, regardless of their quality of products. Nobody wants to deal with bad service, or incompetence. Especially, in this day and age- that’s just how it works. Bad management and representation of a company will unfortunately influence a persons opinion of the services or products offered.

            • His expectations were unreasonable as far as the fact he said the product shouldn’t be on the list because of his poor experience with the company. This is a review blog which is based on the writers opinions.
              A point to also remember is he has not used the product at all.

              You make alot of unfounded sweeping generalisations in your comment. Incompetence and poor management are something completely different than customer service and irrelevant to the conversation.
              A good product speaks for itself. If you have the same product as 1000’s of other company’s then maybe it will play a big factor but to say a company won’t do well without a high level of customer service even if they have a good product is ridiculous.
              It has become a convention in America to expect more than a simple transaction from company’s and sellers, forgetting that you are purchasing a product nothing more, nothing less.
              I won’t try and speak for others but personally I would rather have a Excellent quality product and shitty service than vice versa and the fact remains that Wotofo make good quality products and you don’t need to take out a second mortgage to buy them lol
              I have always been happy with their products. Their service is not terrible if you are actually in need of it. As I said in another comment their customer service is basic it’s for returns and product related stuff not for holding people’s hands on the internet.

            • You get a grip bro. Who are you to attack this person over their opinion? You seem so bitter. What gives you the idea that your opinion is more important than his? Who the fuck are you?

            • The irony of this post is hilarious. The fact you think I was saying my opinion was more valued is funny to me. When it was the op who said that the sappor rda (which he admits later he has never even used) should be taken off the list because they had a bad phone call. Effectively saying that the bloggers opinion is irrelevant because of his experience. I was pointing out how ridiculous and entitled this attitude is.
              Like I said in the previous post he should write his own blog, If I was trying to suppress his opinion why would I say this ?

      • Just today we one of our contributors submitted the Goon blurb for this page. The review will be soon, too.

            • Watched 1 video, had never wicked or installed a coil ever. It was actually easy, this thing is unbelievable, now i get why people drip! what to do with all my other tanks ??? oh well.

    3. wrong picture on the goon lol and it come in brass stainless and black but other than that great review on it. there also seems to be a bunch of the in the vape shop here in tucson az so if you have some contributor here in tucson thats where I would start

    4. The Sapor by Wotofo


      Single-coil only. Are you sure?!!!

      It is a dual coils only.

      • Meant “dual-coil only”. I changed it. Thanks. This list needs an update badly. I will try and get on it as soon as I can.

    5. i had a question on the Derringer by Praxis, i use a simple mech and im just not getting the results i want, any advice? current ohm .9 after some research i had discovered i needed to be at a 1.0 or above but my deck is so small

    Comments are closed.