Council of Vapor Wraith Squonker Kit Review

Today Bill has a look at the Wraith Squonker kit by Council of Vapor. This is a bottom-fed RDA with an 80W TC Box Mod. Find out what he thinks of it...

0
Council of Vapor Wraith box mod black

Council of Vapor Wraith Intro

Squonk boxes, also called Bottom-Feeders, can be terrific. The boxes are to be used with RDAs, but with no dripping. A simple squeeze of the eliquid bottle inside the squonk box sends a shot of eliquid up through the 510 connector and onto the deck of the RDA.

I was an early adopter and a big fan of squonkers. Within a year of my starting to vape in October 2010, I owned ten bottom-feeder boxes. Over the next two years, I acquired seven more. In my stable were three Phids, five REOs, and four Vapage mods, arguably the most popular of all the squonkers ever made (REOs especially are still cherished by a veritable army of “REOnauts.”).

With the explosion of great RDAs and the development of temperature control technology over the past two years, a major comeback of squonking seemed both natural and inevitable, but that’s taken awhile. Now, finally, the resurgence is underway. Various manufacturers are coming out with higher-power, temp-controlled Bottom-Feeder Kits.

Council of Vapor has joined that party with its Wraith Squonker Kit, which includes the 80-watt TC single-18650 Wraith squonk mod and the Wraith bottom-fed RDA.

For more information about squonking, read my full review here at Vaping360 of Kanger’s first squonking kit, the inexpensive but seriously flawed Dripbox.

Council of Vapor Wraith Gallery

Wraith Squonker Specs and Features

CoV Wraith 80W Squonker Box Mod Features

  • 5mL Juice Reservoir
  • Single High-Amp 18650 Battery – Not Included
  • Maximum Wattage Output: 80W
  • Temperature Control Range: 200-600F
  • All-In-One Design – Rebuildable Squonker-Style Platform
  • Versatile Temperature Control Module
  • Premium Zinc Alloy Construction
  • Rubberized Paint Finish
  • Stunning Carbon Fiber Inlay
  • Soft Curvature Design
  • Intuitive OLED Display
  • Bottom-Loaded Battery Cover Design
  • Bottom-Feed Juice Design
  • Squeeze Juice Section for Dripping
  • 510 Connection

CoV Wraith Squonker Atomizer Features

  • 23 mm Diameter
  • Superior Stainless Steel Construction
  • Two-Post
  • Velocity-Style Design
  • Deck-milled Negatives
  • PEEK Insulators
  • Single or Dual Configurations
  • Fully Adjustable Airflow Control
  • Turbine Curved Widebore Drip Tip
  • Squonk-Ready Hollow Center Pin
  • 510 Connection

Notable Remarks

Price

$75-80 online.

Thoughts

Council of Vapor Wraith box mod white

The main competition right now for the CoV Wraith Squonker 80W TC Kit is the Kanger Dripbox 160 TC Kit. The Kanger has one standout feature: the design of the eliquid bottle connector inside the mod is brilliant — simple, easy, leak-proof, and non-messy. Kanger’s design for the connector is superior to Council of Vapor’s. Kanger wins on raw power — 160 watts provided by two 18650s versus 80 watts and only a single 18650 for the CoV Wraith.

In every other way, however, the Council of Vapor Wraith Kit wins, beating the Kanger Kit hands down. Kanger’s 160W TC squonk box has a flaky power curve with questionable temp control, and a magnetized bottom cover for the bottle that tends to fall off. By contrast, CoV’s Wraith 80W TC box is rock solid in both wattage and temp control modes, is ergonomically and aesthetically more pleasing, and has a hinged bottom door for the bottle and battery that’s altogether better than the Kanger design. Finally, the Council of Vapor Wraith bottom-fed RDA seems to me higher quality than the Kanger RDA. That last point isn’t a deal-breaker, though, since I feel that both squonk kits perform better with a third-party bottom-fed atomizer. I use and recommend a Velocity 2 RDA. A vaping kit shouldn’t require additional purchases, and the CoV Wraith Kit doesn’t.

Performance

Council of Vapor Wraith Squonker

I love the performance of the Council of Vapor Wraith set-up. As I wrote above, I prefer to use a Velocity 2 RDA, but CoV’s included Wraith bottom-fed atomizer is no slouch. You don’t need to buy a better bottom-fed RDA than the Wraith; I just happen to have one that I like.

Some vapers wonder or worry about over-squonking. Can you flood the atomizer? The Council of Vapor Wraith set-up is designed so that any excess eliquid flows back into the bottle, so flooding isn’t a problem.

While there’s something to be said for the zen-like ritual of repetitive dripping, the practical convenience of squonking is hard to beat. There’s no stopping to remove a top cap to drip, no eliquid bottle cap to remove and put back on, and no concern about over-dripping. Just squeeze-squeeze, vape-vape-vape, squeeze-squeeze, vape-vape-vape. Easy-peasy, Japanesey.

Verdict

If you already love bottom-feeders or just want to experience what squonking is all about, the CoV Wraith Kit is as good as it gets right now, with ample power and competent, reliable temperature control. The Wraith Kit may be a bit expensive for some frugal vapers, but the $75 price tag is justified by the superb performance.

Recommended.

SHARE
Bill Herbst
My name is Bill. I’ve been a dedicated vaper for five and a half years, having ended a 35-year addiction to tobacco cold-turkey on my first day of vaping. I live on the Oregon coast, in the tiny town of Florence, one huge sand dune away from the Pacific Ocean.