KOOPOR Plus Box Mod Review

Koopor Plus Color Variations
Koopor Plus Color Variations

KOOPOR Plus Intro

A short while back we took a look at the KOOPOR mini, today we’re happily looking at the KOOPOR Plus, from KOOPOR™ a subdivision of SMOK. Like the KOOPOR mini, “It’s a nicely designed mod, without a lot of branding, and a solid housing.” Just like the mini, the Plus is priced incredibly low for the quality of the product. At just $79.99, the Plus is just $26 more than the price of the KOOPOR mini. You can check out the KOOPOR mini review here.

Thanks to KOOPOR™, for sending us this mod for review.


Check out this product via the button below

Save 10% below using the coupon code: V360

*Some discounts are dependent on your geographical location.

KOOPOR Plus Specs and Features

  • 1x KOOPOR Plus KP200 mod
  • 1x Instruction manual
  • 1x Warranty card
  • 1x Battery safety card
  • 1x Silicone sleeve (white, black, or orange)
  • Available in 4 colors
  • 200 watts (great for sub-ohm builds)
  • Dual 18650 for all day vaping (not included)
  • Stainless steel casing
  • Dual Driver System (improves accuracy, and speed, of temperature regulation voltage)
  • High-frequency dynamic monitoring resistance (measures resistance 4000 times a second)
  • Adjustable initial resistance (allows fine tuning, of starting resistance of temp coils)
  • Temperature control, and variable wattage
  • Extra ventilation (keeps unit, and battery cool)
  • Magnetic battery cover
  • Output Power: 6 ~ 200w
  • Output Voltage: 0.35v ~ 8.0v
  • Watt Mode Resistance: 0.1 ~ 3.0Ω
  • Temperature Mode Resistance: 0.08 ~ 3.0Ω
  • Temp Range: 100 ~ 315c / 200 ~ 600f
  • Battery: 2x 18650 (not included)
  • Height: 100.1mm
  • Length: 59.5mm
  • Width: 24.6mm
  • Weight: 244g

Notable Remarks

The KOOPOR Plus has the same stylish design, high degree of vaping control and steel casing with a zinc alloy coating, as its little brother. What separates the KOOPOR Plus is all the improvements. Firstly, the menu system has been revamped and is much easier to navigate, with like and relevant settings grouped in the same sub menus. Temperature control coils has been expanded to include stainless steel, giving us 3 coil options just for temperature control.

Trying to cut back on vaping? Koopor has you covered, with a max puff cutoff. Last but not least, a feature I would like to see on all mods with displays, the wonderful stealth mode. Whether you’re sneaking a puff at a theater, or other event where a light might ruin the mood (please observe vaping laws), or just want to get extended vape time from your batteries, stealth will keep the display from being a nuisance.

The Look

Koopor Plus Color Variations
Koopor Plus Color Variations

The KOOPOR mini comes in four flavors, “Stainless Steel for Purity, Matte White for Grace, Night Black for Mystery and Passion Red for Love”. All 4 feature the KOOPOR™ name and circuit paths design, on the back we have PLUS and an open with arrow. On the bottom of the unit is a nice warning that the micro usb port is only for upgrades.*

The KOOPOR mini features many vent holes on the battery cover and bottom of the unit (48 in total) and adds a nice appeal to the design. On the KOOPOR Plus however there are 110 just on the battery cover, and it just starts to look a bit excessive.

*Based on the recent information on software upgrade for the mini, it requires some special equipment, and will require you to send your KOOPOR Plus to a wholesaler or vendor that is doing the firmware upgrades. I spoke with VaporDNA as well, they are doing the upgrade for customers that bought the KOOPOR mini from them, and are working with Smok, to possibly expand this to other KOOPOR mini owners. So make sure to contact the vendor first, and get all the details.

The Feel

Koopor Plus
Koopor Plus

So let’s just get this out of the way, the KOOPOR Plus is quite heavy. With batteries and a filled tank adding 150g, the Kooper plus weighs just under 400g, or just under a pound. The KOOPOR Plus definitely feels solid, and if you don’t like the bare metal or painted metal the included silicone sleeve will give a nice rubberized grip. The KOOPOR Plus is also a large mod, so bigger hands will likely prefer, while smaller hands will likely prefer the KOOPOR mini.

How does it Vape

Koopor has shown us the smoothness of their control systems, and it makes its return in the KOOPOR Plus. Compared to most temperature control devices, the vaping temperature is much more consistent and steady. The KOOPOR Plus also returns with the soft, normal and hard settings for temperature ramping, with the addition of min and max settings, for a total of 5 wattage ranges when using temperature control.

Who is this for

Koopor Plus Screen
Koopor Plus Screen

With 200w of power, the KOOPOR Plus definitely seems to have the cloud chasers in mind. With its hefty weight and size it’s definitely not small hand friendly. As for the KOOPOR Plus’s battery life and easier menus, it definitely seems that Koopor™ wants to make it a device for all vapers. While it’s a bit more than the KOOPOR mini, the KOOPOR Plus is still priced in line with its competitors.


  • $79.99 MSRP
  • Steel casing
  • Compact design
  • Easy to use quick controls
  • Spring loaded 510
  • Magnetic battery cover
  • Fine tuning controls (for power users)
  • Temperature Control
  • Supports Nickel, Titanium and Stainless Steel coils
Koopor Plus Battery Compartment
Koopor Plus Battery Compartment

The KOOPOR Plus is a nice mod with a pleasant design, with solid construction. The battery life on the KOOPOR Plus seems to be better than any other dual battery device I’ve used to date. I didn’t even use the stealth feature to acquire better battery life. I also found the new menus easier to navigate and find the desired setting, as all settings are now grouped based on relevance to one another.


  • Lack of documentation of advance features
  • Display too dim for outside use on bright days
  • Software upgradable (only through authorized vendors)

The KOOPOR Plus takes the shortcomings of the mini and works to bring the number of faults down even further. Firstly I’d like to address the improvements over the KOOPOR mini. While there are still some translation errors, the instructions do a much better job of covering things, and the menu system. That said, it still fails to list the individual settings, so prepare to do a little research if you want to take full advantage of the advance features.

The issues with the atomizer message also seem to be resolved, and can be fixed on the mini with an update. The LCD, while it’s a bit brighter than the mini’s, it loses a bit of personality, and the brightness still fails to be bright enough for outdoor use. Not worth the tradeoff in my opinion. Button rattle is still an issue on the KOOPOR Plus, though no worse than it is on the mini, and the silicone sleeves do seem to eliminate the rattle.


Other than the documentation still not explaining the advanced features, I really like this device. It’s well made, has a good number of features both for ease of use and for the power user. The KOOPOR™ design may not be for everyone, it is a clean circuit board design that’s sure to draw attention. With a solid stainless steel case, and a powerful 200w output it’s a mod that should last for quite some time. And with the magnetic battery cover, it’s a snap to replace the batteries in the KOOPOR Plus.


Check out this product via the button below

Save 10% below using the coupon code: V360

*Some discounts are dependent on your geographical location.
Nathan Hauck has been in customer services for over 20 years, with a dedication to informing customers. Nathan prides himself on being a jack of all trades, and finds himself devoting his free time to learning new skills. After 22 years of smoking, and vaping products becoming more readily available, Nathan made the switch to vaping and hasn’t looked back.
  • jesse newton

    What type of 18650 batters should be run in the koopor plus I been doing research on batterys but its kind of confusing and I don’t want to run the wrong batterys

      • jesse newton

        Thank you but that still didn’t awnser my question I have read all this and still an wondering what 18650 batterys I should use with the koopor plus 200w box mod not brand or witch is better I want to know what is the suggested battery to run this mod safely well as safe as running a 200w box mod can get with getting the profomance I want witch would be around 100w to 150w I know I need a high drain battery I just am confused about with high drain would be good for tapering at these watts I’m sorry I should have specified my question

        • Jesse, if you ant to safely vape the Koopor Plus at 150W I would suggest getting 2 x LG HB6 18650 1500mAh 30A.

          • Jcloud

            I use the LG brown 35amp 2500 mah
            I currently have smok tank with triple coil @ .18 ohm set at 100 w it’s working perfect as my dealer suggested.

        • Nathan Hauck

          Hi Jesse, Just wanted to chime in with a little info to help you pick the right batteries, if you decide not to go with the HB6 that Alex suggested.

          On a pair of 30 amp batteries, you can build between 0.11 and 0.16 for 100-150 watts. There is a bit of math involved and you’ll need at least 2 figures for the math, which is why your question is difficult with only wattage.

          So for calculating the needed amperage you’ll need the square root of wattage over resistance of the coil(s). This will give you the amperage needed to safely run your device.
          I personally use rapid tables for calculating this kinda stuff.

          Happy and safe vaping!

          PS: if you’re using temperature control, the coils start at around 0.15 with nickle, and around 0.2 to 0.25 with titanium but the resistance goes up as they heat up. In this case, you should be fine with even 20amp batteries.

      • jesse newton

        Vapeing not tapering striped auto correct

  • Michael Abrams

    Just got a Koopor Plus online, and it had all sorts of demons. First of all, it would only increase or decrease in power mode by increments of 10.0. I reset it and that issue went away. However, it would not read resistance correctly, and the first few coils read 0.46 on 0.20 Arctic and 0.25 Crown, no matter what. Then I tried an 0.30 Atlantis, and it read 0.00 ohms. At that point, I removed the batteries, and called Koopor Tech Support. They say it has a defective chip, but thanks for mentioning that authorized vendors may be able to do firmware upgrade…… I may try that first.

    Kooper was pleasant enough, but said they are working with SMOK Tech to try to resolve numerous issues like this, and are not getting much help. This after it took my new TFV4 30 min. sitting in alcohol bath to get the glass unstuck from the o-ring in the base. Not very happy with SMOK Tech at the moment….. 🙁 Stuff like this will never get past the regulators, especially if they read that manual with crazy translation.

    Torn between the new Reuleaux and Sigelei Fuchai, I ordered a Reuleaux. Fingers crossed.

    I will search for Koopor approved firmware upgrade vendors, but if anyone knows how to go about this, it would be helpful. Thanks……

    • Nathan Hauck

      Hi Michael, sorry to hear that you’re having issues with your Koopor Plus. I have had the same issue crop up on the review model since the review. (not registering new coils) I’ve found that if you remove the atty and fire the unit (to get the no atty message), then place the new atty on, it will detect just fine. I still use the Plus and Mini daily, even with their faults, they are great mods, and their resistance measuring is the best I’ve seen.

      I’ve heard good things about both the Reuleaux, and the Fuchai, but can’t currently say that one is better than the other unless you need the extra voltage of the Reuleaux.

      As to your inquiry on firmware, Koopor does not seem to have a firmware update for the Plus at this time. I suggest sending it in for repair/replacement.