Geekvape keeps up with the trends. It’s about time they released a resin tank with mesh coil heads. The Alpha is their latest sub ohm tank designed to match their latest resin dual-battery mod. It’s 25 mm in diameter, holds 4 mL of e-juice and is constructed of resin and steel.
The Alpha features a locking top-fill feature and a new Meshmellow coil system which uses Egyptian organic cotton. Dual-bottom airflow is designed to keep the atomizer cool while running it at high wattages. I’ve used quite a few mesh tanks lately like the SKRR, Mesh Pro and the Fat Baby Mesh. I’m very curious to see how the Alpha compares to them.
The Geekvape Alpha was sent to us to review courtesy of MyVPro.
Colors: Silver ember, silver twilight, silver flare, black onyx, blue onyx
Price: $32.99 (at MyVpro)
The Alpha is well constructed and looks pristine. It has a bulbous shape to it, and a sparkling resin swirled finish. I received the silver twilight version, which looks great on most of my mods. It matches up perfectly with the silver resin design of the Geekvape Nova mod, which we reviewed recently.
The top-fill mechanism is very similar to the ones on the newer SMOK tanks. The top flicks open when you press the “OPEN” button, revealing a rubber-coated fill port. It was relatively easy to fill with a dropper, but not so much with larger chubby gorilla bottles, due to the location of the fill port.
The Alpha sports a convex glass tube and comes with a spare. The rest of the tank is made out of resin-coated stainless steel. The machining is top-notch, which is expected from Geekvape.
Last but not least, it’s topped off with a wide bore drip tip that continues the resin color scheme.
The Alpha tank makes use of a brand-new coil system. Geekvape is calling them Meshmellow coil heads. They both utilize Egyptian organic cotton for wicking instead of the Japanese variety. The single coil is designed for high-wattage while the dual coil is suited for mid-range wattages. Both coils seem to have a narrower opening on top than most mesh coils I have seen, which could possibly give it a slight advantage in terms of flavor.
I have been chain vaping on the MM X1 single mesh coil at around 75 watts for the last week. I haven’t experienced a dry hit, spitback or leaking at all. The X1 coil runs through juice like crazy, but what else would you expect from any 0.2-ohm coil head running at such high wattages?
The other coil head is better suited for mid-wattage vaping. It’s 0.4 ohms and less power-hungry despite being a dual coil. The X2 seems more practical to use with the Alpha, given its 4 mL capacity. The O-rings on the coils have a tendency to slip off, so be careful when installing them.
The Alpha got off to a pretty rough start. The airflow control kept locking up on me. Not to mention, I think I was getting a plastic taste at first. It could have been coming from the resin drip tip or base of the tank. Once I broke it in, both issues have resolved themselves fortunately.
It was nothing but smooth sailing after that. The flavor I get from both coils is very enjoyable. The X2 coil puts out a mean cloud at lower wattages while the X1 provides “in your face” flavor. I’m not sure if the flavor is due to the Egyptian cotton, the overall design, or a little bit of both.
Either way I was very impressed with the performance on this tank. The clouds were off the charts, especially with the X1 coil at 80 watts or higher. It seems to be holding up really well for a week. I specifically used a sweet creamy e-juice to torture test it, and it has passed so far. I think you can get two, maybe even three weeks out of these coils depending on how often you use them.
Using the top-fill came in handy as I have been refilling this tank at least four or five times a day. The tank is easy to take apart and clean, and it uses nice beefy O-rings. The minor issues I had were outweighed by the great flavor and huge dense clouds I got from the Geekvape Alpha.
The airflow control adjusts freely with stoppers on both sides. It is extremely smooth and quiet but gets louder the more you close it off. Not as loud as the Fat Baby Mesh, but it isn’t silent. The airflow system is designed to keep the tank cool at high wattages. It seems to be working.
No matter how high I kicked up the wattage, the vapor never seems to get too hot. Overall the airflow on the Alpha provides a super smooth direct lung draw that works great on every setting. I prefer airflow controls that click into place, but that hasn’t been as popular these days.
We have a winner. Geekvape is very meticulous about their work. You know they put a lot of thought into their products. This tank is evidence that they are aware of what is out there, and striving to improve on it. They’ve adopted some of the most popular features from some of the best sub ohm tanks like a resin body, mesh coils and a locking top-fill system.
All in all, I am very satisfied with this tank. Despite those few hiccups in the beginning, I would still recommend this to somebody looking for a new resin tank with mesh coils. The flavor is on point and the clouds are tremendous, especially using the X1 coils at higher wattage ranges. If you’re using a single-battery mod, the Alpha is a nice option with those X2 coils. What do you think about the Geekvape Alpha? Share your thoughts in the comment section below.
This tank has been incredible for me. Since I got it over three weeks ago, I’ve used it every day (gone through maybe two tanks a day), and it’s still performing about as well as it did in the beginning. The flavor is rich, accurate, and the vapor is obviously good. I just hope the pre-orders for coils gets to me before the coil finally stops performing. This has been my favorite mesh tank so far, even beating out the Mesh Pro from Freemax. I give this the nod over Mesh Pro because the 0.15-ohm coil (the best one) comes… Read more »
Not everyone’s into a resin body on a tank. I prefer metal…jus sayin..
Just saw the Alpha in a shop yesterday. Beautiful construction. I find the Falcon too temperamental and in your face to be a comfortable vape. Og Fireluke Mesh is the opposite, functions great, a bit short on oomph. Mesh Pro double and triple coils don’t last with sweet liquids. Is the Alpha more of the same, or better? Compared to Sense Screen tank also? Favorite tanks are old school- Crown 3 and a Herakles v1 that lives on all these years later.
So far, I am still on my first Alpha coil and it’s been going over a month. I finally did get new coils, but I see no reason yet to change this one out. It’s still doing so well. That said, once a week I take a rolled piece of napkin and wipe away at the inside of the coil until there’s no dark juice build up left. I am still at about one tank fill a day and I’ve been using Yamivapor Chibi Bar Fruitnola (and other Yamivapor juice) almost exclusively. It’s sweet juice, but not as sweet as… Read more »
Where do I find coils for this tank, I went to my neighborhood vape shop and they still haven’t ordered them.
I got mine from MyVPro. My favorite is the MM X1 0.2Ω coils. My first one lasted a long time (over a month), but the inside of the cotton (not the outside) started looking too dark. It still vaped well, but I have to draw the line somewhere! 🙂
I should point out that I use only one flavor in my Alpha (Yami Vapor Fruitnola).
I love so much about this tank, but my first time using it out of the box is not going well. I filled it with approx 3ml of juice and let it sit about a half hour before firing it up. Upon coming back to it, I noticed the airflow was full of juice. I emptied it and the tank – unassembled and reassembled to make sure the factory build hadn’t just left the coil loose or something. Filled it again and the same thing happened. I cleaned up a good amount of juice from the airflow again, but now… Read more »
Hey AJ, I’m sorry to hear that you’re having this problem. I’ve heard about others having it too, which is a shame because I really love the way it performs.
I’m not sure what is causing your problem but I would suggest trying a thicker e-liquid with higher VG content or a new coil. Technically you’re really supposed to close the airflow when it’s not in use, but I have never experienced this issue and I’ve gone through a few coils on multiple tanks. It shouldn’t be happening to you.
Here is a guide with more information about leaking:
https://vaping360.com/best-vape-tanks/how-to-stop-leaking-popping-spitting/
Hey Dave,
Appreciate the review, this review made me go out and buy his and I have you to thank for smooth delicious vaping.
I did have a question I thought you might be able to point me in the right direction of….
Glass. Broke one before even vaping it for the first time. Oops. Found clear glass, but wondered about color. What glass is this tank compatible with? Can’t seem to find much for this tank specifically but hoped you might know?
Cheers.
Hey Dylan! Thanks for the compliment, I’m glad you are enjoying the tank as much as I do! I think it’s one of the best sub ohm tanks I have used in a while. I would suggest contacting Geekvape about a spare glass, because it would be very hard to find a generic glass to fit this tank.
No worries! Thanks for your help. I did find a cool customs page for vapes. They make an add on that they call ADV (all day vape). It turns the alphas tiny tank into a 10ml tank. Also has replacement glass for it (Black, red, blue, frosted and clear). 33mm wide though… gonna try it out I think.
https://www.inkedatty.com/collections/alpha-tank-all-items/products/adv-expansion-kit-alpha-geekvape-all-day-vape
Wow. Thanks for that info, I wasn’t aware of the expansion pack. 10 mL!? That’s equal to a small bottle of e-liquid! Sounds great, enjoy Dylan.