The Troll RTA by WOTOFO Preview

The Troll RTA is a good lookin' little device clearly designed for maximum flavor.


The Troll RTA Intro

Wait, what? The Troll is now a tank? That’s right, the widely popular Troll RDA by Wotofo has now grinned itself into RTA territory, but the signature logo of the Troll will not be plastered on this tank. Fine by me.

Picking up where its predecessor left off, the Troll RTA It’s bigger and beefier, because well, now it’s a tank! It’ll be interesting to see if Wotofo keeps up their solid momentum built on The Troll RDA, Sapor, Serpent Mini, etc. From what I can see, Wotofo may just have a hit with this one.

Let’s take a quick look at this tank and see why.

Price: $30-35

Save 10%

The Troll RTA Specs and Features


  • 24mm Diameter
  • 5ml Tank Capacity
  • High Capacity Tank Reservoir
  • Threaded Top Fill
  • Two Large Fill Ports
  • Stacked T Post Midsection Build Deck
  • Dual Coil Design
  • Four Terminal
  • Side Mounted Phillips Screws
  • 2.5mm by 2mm Terminals
  • 4mm Quad Circle Wicking Ports
  • Quad Centered 3mm Internal Airholes
  • Two Per Side
  • PEEK Insulation
  • Dual Adjustable Bottom Airslots
  • 10mm by 2mm Each Airslot
  • Can Be Sealed
  • 10mm Bore Delrin Threaded Drip Cap
  • 304 Stainless Steel and Glass Construction
  • Gold Plated 510 Contactwo Large Fill Ports

A unique Troll

Wotofo-The-Troll coil

The Troll RTA by Wotofo has stepped up its game. This puppy is 24mm in diameter, 33mm in diameter, and it has a juice-guzzling potential of 5ml — not TPD compliant. YES! No 2ml tank here.

The deck on The Troll RTA is unique. It’s dual coil and it’s got the positive and negative posts horizontally stacked on top of one another. The solid mass of the stacked posts appears to reduce the size of the unused portion of the deck. As we know about deck reducers, which this essentially is, they’re thought to accomplish a better conveyance of flavor. In my experience, that is exactly what happens. Better flavor.

A Troll you want to feed


The post holes are generous and capable of supporting fancy wire builds, which is fairly commonplace these days. But here’s where Wotofo continues to mix it up. The Troll RTA sports an elevated deck. It’s not your typical bottom-coil RTA, yet it’s not one of the top coil genny-style RTAs either. The deck is positioned midway up the tank height, like the DigiFlavor Fuji. This shows me that the tank is probably capable of fast wicking.

Lastly, there is a somewhat domed chimney, which many believe will also add to the flavor potential. Combine that with the reduced deck and short stature and you just bought yourself a ticket to flavor country. That’s my view on it anyway.

What do you all think?

Save 10%
The Vaping360 team is a diverse group of experienced vaping contributors. We strive to bring you the finest content on all things vaping. Don’t forget to sign up to our newsletter and make sure to follow us on Facebook and Instagram for more!

Add comment

E-mail is already registered on the site. Please use the Login form or enter another.

You entered an incorrect username or password

Sorry that something went wrong, repeat again!


by Newest
by Best by Newest by Oldest

I’ve got it due to the advice of many people however i haven’t got on with it fully 100% but there’s a lot of good to note.

Looks wise, it’s a very sharp tank and sits well on most mods due to its quite stubby stature.

If you can perfect the below 2 things then the heat and flavour production it generates is on par with my Limitless RDTA Classic which in my eyes is pretty awsome. (i actually prefer the draw on the Troll by a mile though…)

– Premade coils are too big, if you get them too close to the insulator you WILL melt it and too far away, you will hit the outside chamber and it will short circuit. It’s best to have them close than further away from the insulator and when checking your coils are burning properly do it in little bursts. I did the opposite and over compensated, hit the outside chamber and sent a horrible taste into my mouth followed by a flame coming out of the end of the tank o.O – safe to say i needed a new pair of lungs after…and underwear.

-the end of the cotton when wicking shouldn’t be long but should protrude only a little from the entry holes, otherwise the flavour is affected.

Other than the above, i still persevere as i think this tank could be my favourite once i’ve perfected the coils i use and the wicking process!

Good luck and enjoy!