Innokin Disrupter Box Mod Review

5
Innokin Disrupter
Innokin Disrupter

Innokin Disrupter Intro

Today we take a look at the Innokin Disrupter 50W box mod. The Disrupter features Innokin’s innovative new removable Innocell Lipo battery technology. Innokin have been working to create a superior Lipo battery that works better than an 18650 battery and can also be removed from the box mod itself. The idea is to have several Innocell batteries that use a slide and click system and can be replaced easily when you run out of battery.

Innokin are really on a roll at the moment with the recent launches of their MVP 3 Pro mod, Coolfire IV and now the Disrupter (there is also a temp control box mod in the works as well!).

Discounts

Check out this product via the button below

Get free shipping on your purchase from Direct Vapor below:

*Some discounts are dependent on your geographical location.

Innokin Disrupter Specs and Features

Innokin Disrupter Kit Content
Innokin Disrupter Kit Content
  • 1 x Disrupter Box Mod
  • 1 x 2000mAh Innocell Battery
  • 1 x USB Charger
  • Vape while charging technology
  • InnoCell Vaping Power System LiPo replaceable battery technology (30% more charge & discharge cycles than a standard 18650)
  • Battery: 2000mAh
  • Resistance: 0.2 Minimum
  • Wattage: 6-50W

Notable Remarks

What is this Innocell battery technology and how does it work?

Innokin Disrupter Innocell's
Innokin Disrupter Innocell's

The Innocell batteries according to Innokin have been engineered purely with vaping in mind. They are meant to be superior to standard 18650 batteries (30% more charge and discharge than an 18650).

The new Innocell batteries will have a 300 charge cycle lifetime and have a continuous 20A output. The output uses a VRMS DC and PWN current, which apparently leads to a more precise and stable power output even at 50W with a max deviation of 0.5W. The full 50Ws will be maintained precisely between 0.2 and 3.1ohms. This then means that you can be sure when firing at any wattage, that you will be getting that correct wattage within 0.5W.

We haven’t measured the above ourselves, so it is hard to say if this works or not. It will be interesting to see Pbusardo or someone measuring the exact output over different wattages to really see how good these new Innocell batteries are. We vaped them and they worked very well for us and I like the slide and click technology, whereby you can replace the LiPo batteries like you would an 18650!

Overall we really like that Innokin are innovating here. Being able to remove the LiPo batteries, fixes the main issue I have with LiPos, in that once they are empty you need to recharge them without being able to remove the battery and replace it with a spare. Now having 2-3 batteries means you can quickly switch over, once one is done and have the others charging in the background!

The Innocell batteries will be costing below $20 per piece, which isn’t bad. I hope they will be more around the $15, as I think that would provide me with more of an incentive to buy 2-3 batteries to have them lying around in case I run out of battery.

As our Disrupter is a sample I do not yet know how much the actual disrupter mod + one Innocell will cost.

Using the Innokin Disrupter mod

The screen on the Disrupter works great just like any Innokin screen and scrolling up and down between wattages is easy. You can flip the screen by holding down the + and – buttons. Hitting the + and – together briefly will show the puff counter. As usual, the screen is 3 clicks to turn on and off.

To attach the Innocell LiPo battery you need to slide and click the battery onto the Disrupter vape mod part of the device. Once in place it is held into place by a magnet and is fairly solid and won’t fall out by mistake.

Likes

Innocell Batteries

Disrupter Innocell Connecting Port
Disrupter Innocell Connecting Port

The Innocell battery concept is really innovative. As said above it solves the issue you have with LiPos being non removable and thus once dead you have to charge your device again before being able to vape it again. You can of course use pass through charging, but I don’t ever really use that myself.
Being able to quickly swap a new Innocell battery in, makes the batteries much more like 18650s, whereby you can have several to swap in and out of the device when needed. According to Innokin their Innocell batteries are also superior to 18650s and provide a more continuous and stable output even at higher wattages.

Spring Loaded 510 Pin

Innokin Disrupter Pin
Innokin Disrupter Pin

​The Innokin Disrupter comes with a spring loaded 510 pin. We had no issues with any of our tanks sitting flush on the top of the mod. 22mm tanks will sit flush with no overlaps, but anything bigger might overlap over the side of the mod.

Safety Features

The Innokin Disrupter comes packed with safety features, as we have come to expect from a regulated box mod. Below are some of the safety features:

  • 15 second cut-off
  • Low voltage warning
  • Short circuit protection
  • Over discharge protection

Good Screen

As always with the Innokin box mods, the screen is a good size and easy to read. It displays the standard stats and can be flipped as well by holding the + and – buttons. The wattages can be changed in 0.5W increments and the screen will round robin once it reaches 50W back down to 6W.

Solid Build Quality

Innokin Disrupter (Silver with Silver Innocell) with Saucecode Tank
Innokin Disrupter (Silver with Silver Innocell) with Saucecode Tank

We have become used to Innokin making some very well crafted devices that are very solid. The Disrupter is no different and feels very sturdy and solid in your hand, much like the MVP 3 Pro.

Size

The Innokin Disrupter is slightly smaller than the MVP 3 Pro in terms of height. It therefore lacks the additional charging capability the MVP 3 pro has. Apart from that, the Disrupter feels just as solid and sits well in your hand. The removable LiPo battery gives it the edge in my opinion over the MVP 3 Pro, if you don’t mind losing the on-board charger on the MVP.

0.2ohm Resistance

The minimum 0.2ohm resistance is a decent minimum to have, especially given all the new sub ohm tanks with low resistance coils.

​Different Color Batteries

Innokin Disrupter Innocell's
Innokin Disrupter Innocell's

The Innocell batteries come in a variety of different colors, so you can mix match your set-up and configure however you like!

Pass Through Charging

I don’t really like using pass through charging, but the Disrupter can be charged whilst vaping. I would make sure to read the manual about making sure you use the correct charging cables and devices etc.

Informative Manual

​Please do have a read through the manual before vaping this device and before charging it etc. It is a very comprehensive manual, which is good. Make sure to do your homework, as this is a new type of box mod and LiPos should always be handled with care especially when charging them.

Dislikes

2000mAh Battery

​The 2000mAh battery isn’t bad at all and will last you around a day of vaping on a 0.2ohm coil. I would however haveliked a 2500-3000mAh battery, but perhaps I am being greedy! I guess by being able to swap out batteries the size of the battery capacity isn’t as important.

Looks

Innokin have done a great job of integrating the Innocell battery into the mod with the click and slide system. However, the one area that is slightly ugly, is the top of the Innocell battery that lies next to the 510 pin at the top of the mod. It has 4 screws and a rather ugly looking plate. That is just my opinion though and isn’t a big deal really at all. Apart from that there really isn’t anything to fault about this box mod and it is a very innovative piece of engineering by Innokin!

Verdict

I think the Innokin Disrupter box mod alongside the new Innocell LiPo battery technology is a really innovative creation. The slide and click Innocell batteries work great and last surprisingly long for only being 2000mAh batteries. You can mix and match colors and I would recommend getting an extra Innocell battery or two depending on what their final prices are.

I think Innokin are really onto something with this technology and if they can implement this into their temp control box mod going forward (which I think they are), they could be onto something special. Time will tell how long these Innocell Lipo batteries actually last and if they really perform well up until 300 charge cycles.

The Innokin Disrupter box mod and Innocell battery technology gets a big thumbs up and I am sure we will see a lot more of this type of technology being used going forward!

Discounts

Check out this product via the button below

Get free shipping on your purchase from Direct Vapor below:

*Some discounts are dependent on your geographical location.
SHARE
Chris Kendell
Chris Kendell is the co-founder of Vaping360. He started the website with his brother and co-founder Alex in 2014, after Alex introduced him to vaping. Chris was immediately won over by the revolutionary and potentially lifesaving impacts that vaping can have on our society. In his minuscule spare time, you can find Chris travelling and exploring new places from his base in Germany, eating delicious food and enjoying a range of different sports.
  • Turbosloth

    Interesting, haven’t been much of a fan of innokin since their MVP 2 but this is certainly different and good looking.

    • The Chinese tend to overuse the word “innovative”, but this is actually pretty innovative and different!

  • Brendon Booth

    I have been using the Disrupter for almost a year. I purchased two batteries to continuously swap. One battery wore out at the USB connection point and was shelved, the other is still going strong. Innokin recently came out with a larger battery, the C50 plus, that is 3300amh. At full charge the larger battery can get me through the day with a little bit of pass through, and I am a HEAVY vaper that runs the mod, most often, at the max 50w @ 7.5v.

    I have only used Innokin since the original MVP and my happiness increases with each new innovative box. I transitioned from the MVP 2.0 to the Disrupter as my intro to sub-ohm and the box has seen me through 5 or 6 different tank set ups. I just jumped into RDA’s and the Disrupter was fine for my first couple of builds. Now, the 50w max just isn’t enough to drip my RDA at my desk or chillin on the couch, but I will keep it for my tank sets when RDA isn’t convenient.

    Bottom line…for intermediate vaping (beginner sub-ohm to 1ohm+), this is the perfect mod with the 3300 battery convenience and the easy control adjustability. The bonus is the multiple color variation you can employ.

    A year out, and I can’t recommend this enough.

    • Robyn Harkey

      Hi Brendon,
      I’m new here & weren’t sure you’d see my question unless I re posted it as a reply to you!
      I would love to know where I can find the new C50 plus battery for the Disrupter & how much they cost!
      Thanks

  • Robyn Harkey

    Brendon,
    Where do you find the new C50 plus battery for the Disrupter & how much do they run?
    Thanks for any info you can give!